Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man61) Service Manual online
MX-7000N PHOTOCONDUCTOR SECTION J – 5
3. Disassembly and assembly
A. OPC drum unit (CL)
(1) OPC durm unit (CL)
1)
Remove the development unit (CL). (Refer to the "[L] DEVEL-
OPING SECTION".)
OPING SECTION".)
2)
Hold the lock lever (A), and pull out OPC drum unit (CL) gently,
and remove OPC drum unit (CL) (B) while supporting the lower
section with both hands.
and remove OPC drum unit (CL) (B) while supporting the lower
section with both hands.
a. Drum (CL)
1)
Remove the development unit (CL). (Refer to the "[L] DEVEL-
OPING SECTION".)
OPING SECTION".)
2)
Remove the OPC drum unit (CL). (Refer to the "(1) OPC durm
unit (CL)".)
unit (CL)".)
3)
Remove the screws (A), and remove the fixing shaft (B).
4)
Slide the drum (CL) to the front side, and lift the OPC drum
rear side (C), and remove the drum (CL) (D) from the hole in
the front section.
* When installing, apply stearin acid to the drum (CL) surface
rear side (C), and remove the drum (CL) (D) from the hole in
the front section.
* When installing, apply stearin acid to the drum (CL) surface
(E).
Unit
Page
A
OPC drum unit (CL)
J - 5
B
OPC drum unit (BK)
J - 7
C
Waste toner section
J -12
Unit
Parts
Mainte
nance
Page
1
OPC drum
unit (CL)
unit (CL)
a
Drum (CL)
▲
J - 5
b
Charge unit
▲
J - 6
c
Side seal F (CL)
✕
J - 6
d
Side seal R (CL)
✕
e
Toner reception seal (CL)
✕
f
Cleaner blade (CL)
▲
g
Toner mixing sheet
▲
Unit
1
OPC drum unit (CL)
1-b
1-c
1-a
1-e
1-f
1-d
1
1-g
1
A
B
1
Unit
Parts
Mainte
nance
1
OPC drum unit (CL)
a
Drum (CL)
▲
1-a
A
B
A
C
D
1-a
E
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man61) service manuals if exist.