Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man61) Service Manual online
MX-7000N PHOTOCONDUCTOR SECTION J – 14
2)
Remove the right lower door, the right cabinet lower, and the
LCC lower cabinet. (Refer to the “[A] EXTERNAL OUTFIT”.)
LCC lower cabinet. (Refer to the “[A] EXTERNAL OUTFIT”.)
3)
Remove the LCC transport unit. (Refer to the “[G] PAPER
TRANSPORT SECTION”.)
TRANSPORT SECTION”.)
4)
Remove the front cabinet upper and the frame cover R. (Refer
to the “[A] EXTERNAL OUTFIT”.)
to the “[A] EXTERNAL OUTFIT”.)
5)
Disconnect the connector (A). Remove the E-ring (B), and
remove the gear (C). Remove the screws (D), and remove the
waste toner drive unit (E).
remove the gear (C). Remove the screws (D), and remove the
waste toner drive unit (E).
6)
Disconnect the connector (F). Remove the E-ring (G), the
polyslider (H), and the bearing (I). Remove the screws (J), and
remove the drive mounting plate (K).
polyslider (H), and the bearing (I). Remove the screws (J), and
remove the drive mounting plate (K).
7)
Remove the E-ring (L), and remove the gears (M). Remove the
screws (N), and remove the waste toner drive motor (O).
* When installing, fit the triangle mark (P) of the drive mount-
screws (N), and remove the waste toner drive motor (O).
* When installing, fit the triangle mark (P) of the drive mount-
ing plate to the connector (Q) position, and install it.
A
E
C
D
D
B
G
J
K
I H
J
F
L
N
N
N
O
M
d
P
Q
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man61) service manuals if exist.