Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man6) Handy Guide online
10
22-04-2008
Initial Set-up
DEVELOPER INSTALLATION
Sim 25-02
Auto Developer Adjustment
Select CMYK
Select CMYK
Note: Toner Installation should be performed
after Auto Developer Adjustment is completed
after Auto Developer Adjustment is completed
INITIAL SETTINGS
Sim 26-02
LCC Paper Size Set-up
Sim 26-06
MachineDestination
Sim 26-35
Set Multi Error Counter Set to 1 (Multi Count)
Sim 26-65
Finisher Alarm mode
Select Staple sheet limit (30 or 50)
Select Staple sheet limit (30 or 50)
Staple copies/sets limit (ON/OFF)
Sim 26-67
Summer Time/Internet Time Syncronization
CASSETTE SETUP & PAPER TYPE
Set cassette size by adjusting the guides in the cassette.
Paper Size & Type Setting:- System Settings – Tray Settings
IMAGE WRITING DISTORTION – CMYK
Sim 61-04
Image Writing Adjustment
Select Paper A3
Select Paper A3
PRINT IMAGE MAGNIFICATION & OFF CENTRE
Manual Adjustment:
Sim 50-10
Adjust BK MAG to 240mm
Image Off Centre Adjustment
(All cassettes & ADU).
Image Off Centre Adjustment
(All cassettes & ADU).
Automatic Adjustment:
Sim 50-28
BK MAG ADJUST (Magnification)
SETUP/PRINT ADJ (Offset)
SETUP/PRINT ADJ (Offset)
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man6) service manuals if exist.