Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man50) Service Manual online
MX-7000N ELECTRICAL SECTION 11 – 44
CCHP
Charger cleaner HP detector
[Photo interrupter]
[Photo interrupter]
Detects the charger cleaner
position (in the process unit).
position (in the process unit).
-
HOME
CN9
13
PCU
CCM
Charger cleaner motor
[Brush motor]
[Brush motor]
Cleans the main charger.
-
-
CN13
33, 35
PCU
Normal/reverse
rotation with
2-phase.
rotation with
2-phase.
CCM_ROT
CCM rotation detector
[Photo interrupter]
[Photo interrupter]
Detects the RPM of the
charger cleaner.
charger cleaner.
-
-
CN18
2 3
PCU
RPM detection
CFM
Charger cooling fan motor
Exhausts ozone.
Stop
Drive
CN3
24
PCU
CFM_LD
CFM lock detector
Detects the CFM lock.
-
Lock
detected
CN3
26
PCU
CLI
Scanner lamp[Xenon lamp]
Radiates lights onto a
document for the CCD to
scan the document images.
document for the CCD to
scan the document images.
ON
OFF
CN130
3
SCU
CPUFM
Controller cooling fan motor
Cools the control PWB.
Stop
Drive
CN13
1
Mother
CPUFM_PWM
Controller cooling fan motor
control
control
Controls the controller cooling
fan motor RPM.
fan motor RPM.
-
-
CN13
2
Mother
CPUFM_LD
Controller cooling fan motor
lock
lock
Detects the controller cooling
fan motor lock.
fan motor lock.
-
Lock
detected
CN13
4
Mother
CPFM_D
Paper feed motor
[DC brushless motor]
[DC brushless motor]
Drives the paper feed section.
Drive
Stop
CN4
9
PCU
CPFM_CK
Paper feed motor control
Controls the paper feed motor
RPM.
RPM.
-
-
CN4
11
PCU
PWM drive
CPFM_LD
Paper feed motor lock
Detects the paper feed motor
lock.
lock.
-
Lock
detected
CN4
13
PCU
CSDH
Cassette dehumidifying
heater
heater
Dehumidifies paper.
CV_CA
Clear all signal [Coin vendor]
Clean all
Clear
-
CN17
6
PCU
CV_CLCOPY
Copy enable signal (Color)
[Coin vendor]
[Coin vendor]
Copy enable (Color)
Copy
Enable
-
CN17
7
PCU
CV_COPY
Copy enable signal
(Monochrome) [Coin vendor]
(Monochrome) [Coin vendor]
Coy enable (Monochrome)
Copy
Enable
-
CN17
3
PCU
CV_COUNT
Count-up signal
[Coin vendor]
[Coin vendor]
Count-up
Count UP
-
CN17
4
PCU
CV_DUPLEX
Print count identification
signal (Duplex mode)
[Coin Vendor]
signal (Duplex mode)
[Coin Vendor]
Identifies the print count.
(Duplex mode)
(Duplex mode)
DUPLEX
-
CN17
11
PCU
CV_SIZE0
Paper size detection 0
[Coin vendor]
[Coin vendor]
Paper size 0
-
-
CN17
13
PCU
CV_SIZE1
Paper size detection 1
[Coin vendor]
[Coin vendor]
Paper size 1
-
-
CN17
14
PCU
CV_SIZE2
Paper size detection 2
[Coin vendor]
[Coin vendor]
Paper size 2
-
-
CN17
15
PCU
CV_SIZE3
Paper size detection 3
[Coin vendor]
[Coin vendor]
Paper size 3
-
-
CN17
16
PCU
CV_STAPLE
Staple mode signal
[Coin vendor]
[Coin vendor]
Identifies presence of the
staple mode.
staple mode.
STAPLE
-
CN17
9
PCU
CV_START
Copy start signal
[Coin vendor]
[Coin vendor]
Copy start status
Start
-
CN17
5
PCU
DHPD_C
C phase detection
[Photo interrupter]
[Photo interrupter]
Detects C phase.
-
Reference
CN9
12
PCU
DHPD_K
K phase detection
[Photo interrupter]
[Photo interrupter]
Detects K phase.
-
Reference
CN13
21
PCU
DHPD_M
M phase detection
[Photo interrupter]
[Photo interrupter]
Detects M phase.
-
Reference
CN9
14
PCU
DHPD_Y
Y phase detection
[Photo interrupter]
[Photo interrupter]
Detects Y phase.
-
Reference
CN9
16
PCU
DHS1
Scanner heater
Keeps the heat in the scanner
unit.
unit.
DL_C
Discharge lamp (C) [LED]
Discharges the
photoconductor.
photoconductor.
OFF
ON
CN7
3
PCU
DL_K
Discharge lamp (K)
Discharges the
photoconductor.
photoconductor.
OFF
ON
CN9
9
PCU
DL_M
Discharge lamp (M) [LED]
Discharges the
photoconductor.
photoconductor.
OFF
ON
CN7
19
PCU
DL_Y
Discharge lamp (Y) [LED]
Discharges the
photoconductor.
photoconductor.
OFF
ON
CN7
8
PCU
DM_C
Drum motor C
[Stepping motor]
[Stepping motor]
Drives the cyan
photoconductor unit.
photoconductor unit.
-
-
CN5
9, 10,
11, 12
Driver
Drives with
4-phase signals.
4-phase signals.
DM_K
Drum motor K
[Stepping motor]
[Stepping motor]
Drives the black
photoconductor unit.
photoconductor unit.
-
-
CN5
3, 4, 5,
6
Driver
Drives with
4-phase signals.
4-phase signals.
DM_M
Drum motor M
[Stepping motor]
[Stepping motor]
Drives the magenta
photoconductor unit.
photoconductor unit.
-
-
CN6
3, 4, 5,
6
Driver
Drives with
4-phase signals.
4-phase signals.
DM_Y
Drum motor Y
[Stepping motor]
[Stepping motor]
Drives the yellow
photoconductor unit.
photoconductor unit.
-
-
CN6
9, 10,
11, 12
Driver
Drives with
4-phase signals.
4-phase signals.
Signal name
Name [Type]
Function/Operation
Connector level
Connector
No.
Pin
No.
No.
PWB
name
NOTE
"L"
"H"
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man50) service manuals if exist.