Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man36) Peripheral online
MX-7000N MX-FXX1 13 – 4
3)
Connect the I/F cable to the MFP PWB. Push the I/F cable into
the recessed portion of the sheet metal on the control box.
Attach the snap band to sheet metal of the control box.
* Check that the connector is not obliquely inserted.
the recessed portion of the sheet metal on the control box.
Attach the snap band to sheet metal of the control box.
* Check that the connector is not obliquely inserted.
F. Installation of the control box
1)
Push the control box into the main unit. Lay the finger handle.
Fix with the screws.
Fix with the screws.
2)
Cut out the cut-out portion of the right rear cabinet.
3)
Push into the cable to the right cabinet rear cover, and attach
it. At this time, check that the pawls are properly fitted to the
main unit.
it. At this time, check that the pawls are properly fitted to the
main unit.
G. Turn ON the main power switch of the main
unit
1)
Insert the power plug of the main unit into the power outlet.
2)
Open the front cabinet. Turn ON the power switch in the front
cabinet of the main unit.
cabinet of the main unit.
3)
Turn ON the power switch on the operation panel.
1
2
3
1
2
2
3
3
2
4
5
2
3
1
"ON"
ON
ON
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man36) service manuals if exist.