Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man27) Peripheral online
MX-7000N MX-RBX2 4 – 2
2. Installation
<Note before installation>
* Before starting installation, check to insure that the data lamp on
* Before starting installation, check to insure that the data lamp on
the operation panel does not light up or blink.
A. Turn OFF the power of the main unit
1)
Turn OFF the power switch on the operation panel.
2)
Open the front cabinet of the main unit. Turn OFF the power
switch in the front cabinet.
switch in the front cabinet.
3)
Disconnect the power plug of the main unit from the power out-
let.
let.
B. Removal of the toner cartridge
1)
Open the toner cover.
2)
Remove the toner cartridge.
C. Removal of the paper exit tray
1)
Remove the E-ring, and remove the toner cover.
2)
Remove the paper holding arm and the paper exit full detec-
tion actuator.
tion actuator.
3)
Remove the screws, and remove the paper exit tray.
"OFF"
"OFF"
"OFF"
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man27) service manuals if exist.