Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man130) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
- Procedures for affixing fusing transfer sheets and fusing transfer sheet holding felt (4 parts).
- Peel off the longer base of the adhesive tape and affix the tape onto the post-fusing
upper PG rib to be added this time.
- Affix the fusing transfer sheet holding felt onto the fusing transfer sheet on the back of the
post-fusing upper PG.
4.Action:
Modified guide - From September 2009 production
Please be aware when fitting this modified guide that the following is carried out:
1-
Apply the latest firmware- PLUS PCU Patch version
for E7-20 issue.
2-
Carry out CCE-591.
3-
Temperature settings are adjusted as follows.
Sim 43-01
A 190, B 135, C 160, D 205,E 200, F 155, G 190, H 220, I 190
J 125, K 180, L 205,
Sim 43-04
A 185, B 150, C 175
4-
Then carry out the full MX Colour calibration as set out in bulletin GENERAL PROCEDURE
FOR COLOUR (Found in the handyguide section on Tech Web)
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man130) service manuals if exist.