Read Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man7) Service Manual online
MX-6070N MX-PN15B/C/D (PUNCH MODULE) 13 – 10
42) Install the knobs (x2).
For MX-FN29 (Saddle finisher), also install the knob shown in the
figure below.
figure below.
43) After installing the finisher to the main unit, fix the position shown
in the figure below with the screw. (Use the screw removed at
Step 11.)
Step 11.)
44) Close the front door of the finisher.
45) Fix the harness section of the paper pass unit, and connect the
harness.
46) Fix the connector cover with the screw.
B. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet, and
turn ON the main power switch and the operation panel power
switch.
turn ON the main power switch and the operation panel power
switch.
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man7) service manuals if exist.