Read Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man6) Service Manual online
MX-6070N SIMULATION 6 – 7
50
1
Copy image position, image loss
adjustment
adjustment
1-1
5
Used to adjust the print lead edge image
position
position
1-1
6
Used to adjust the copy image position and
the image loss (SPF mode)
the image loss (SPF mode)
1-1
10
Used to adjust print image position
1-2
2-1
1-1
12
Used to perform the scan image off center
position adjustment
position adjustment
1-1
20
Image registration adjustment (Main
scanning direction)
scanning direction)
1-2
22
Used to adjust the image registration (Main
scan direction, sub scan direction)
scan direction, sub scan direction)
1-1
2-1
1-1
-2
23
Used to set the registration for temperature
adjustment
adjustment
24
Used to display the detail data of SIM 44-2,
50-22
50-22
27
Used to perform the image loss adjustment
of scanned images in the FAX or image
send mode
of scanned images in the FAX or image
send mode
28
Used to automatically adjust the image
loss, void area, image off center and image
magnification ratio
loss, void area, image off center and image
magnification ratio
51
1
Used to adjust the ON/OFF timing of the
secondary transport voltage
secondary transport voltage
2
Used to adjust the contact pressure
(deflection amount) on paper by the main
unit and the SPF resist roller
(deflection amount) on paper by the main
unit and the SPF resist roller
53
6
Used to adjust the detection level of the
SPF document width
SPF document width
3
7
Used to adjust the SPF document size
width sensor
width sensor
8
Used to adjust the document lead edge
reference and the SPF mode document
scan position
reference and the SPF mode document
scan position
3
9
SPF dirt detection setting
10
SPF dirt detection execution
55
1
Used to set the specification of the engine
control operations (SOFT SW)
control operations (SOFT SW)
2
Used to set the specifications of the
scanner control operation (SOFT SW)
scanner control operation (SOFT SW)
3
Used to set the specifications of the
controller operation (SOFT SW)
controller operation (SOFT SW)
10
Used to set the special stamp text for
Taiwan
Taiwan
56
1
Used to transport data between HDD - MFP
PWB SRAM/EEPROM
PWB SRAM/EEPROM
2
Used to backup the data in the EEPROM
and HDD to the USB memory
and HDD to the USB memory
3
Used to backup the document filing data to
the USB memory
the USB memory
4
Used to backup the JOB log data to the
USB memory
USB memory
5
Used to import the SIM22-6 data to a USB
memory in the text format
memory in the text format
6
Used to output the JAM/trouble data
7
Used to export system log data to the USB
memory
memory
8
Used to perform ICC profile update
15
MFP EEPROM data restore
99
Used to export system log data to the USB
memory
memory
3-4
1-5
9-4
60
1
Used to check the memory operations
(read/write) of the SCU-MFP PWB
(read/write) of the SCU-MFP PWB
61
1
Used to check the LSU polygon motor
rotation and laser detection
rotation and laser detection
3
Used to set the laser power
Sim No.
Easy Mode
In
st
a
lla
ti
o
n
Main
te
nance
Adjus
tm
e
nt and
Set
ti
ngs
61
4
Used to print the print image skew
adjustment pattern
adjustment pattern
11
Used to correct the laser power
automatically
automatically
2-3
1-2
-3
12
Laser power manual correction
13
Used to clear the laser power correction
value
value
2-3
1-3
14
Used to set the laser power correction
1-3
62
1
Used to format the HDD
2
Used to check read/write of the HDD
(partial)
(partial)
3
Used to check read/write of the HDD (all
areas)
areas)
6
Used to perform the self diagnostics of the
HDD
HDD
7
Used to print the HDD self diagnostics error
log
log
8
Used to format the HDD
10
Used to clear the job completion list data
11
Used to delete the document filing data
12
Used to set Enable/Disable of auto format
in a HDD trouble
in a HDD trouble
13
Used to format the HDD (Operation manual
watermark data only)
watermark data only)
14
Used to delete the document filing
management data
management data
20
Used to check the status display of HDD
63
1
Used to display the shading correction
result
result
2
Used to perform shading
1-5
3
3
Used to perform scanner (CCD) color
balance and gamma auto adjustment
balance and gamma auto adjustment
1-5
2-3
3
4
Used to display the scanner test chart patch
density
density
5
Used to perform the scanner (CCD) color
balance and gamma default setting
balance and gamma default setting
2-3
3
7
Used to register the service target of the
copy mode auto color balance adjustment
copy mode auto color balance adjustment
5
8
Used to set the default of the service target
of the copy mode auto color balance
adjustment
of the copy mode auto color balance
adjustment
5
11
Used to set the target color balance of the
copy mode auto color balance adjustment
copy mode auto color balance adjustment
5
64
1
Test print (self print) (color mode)
2
Test print (self print) (monochrome mode)
8
4
Printer test print (self print)
5
Printer test print (self print) (PCL)
1-4
6
Printer test print (self print) (PS)
65
1
Used to adjust the touch panel (LCD display
section) detection coodinates
section) detection coodinates
7
2
Used to display the touch panel (LCD
display section) detection coodinates
display section) detection coodinates
5
Used to check the operation panel key input
66
1
Used to display the image send-related soft
SW (2-150) on the LCD to allow changing
the soft SW while checking with the LCD
SW (2-150) on the LCD to allow changing
the soft SW while checking with the LCD
2-3
2
Used to enter a country code and set the
default value for the country code
default value for the country code
3
Used to check read/write of the EEPROM
and the SDRAM on the MODEM controller
and display the result
and the SDRAM on the MODEM controller
and display the result
4
Used to send the selected signals to the
line and the main unit speaker (send level:
max)
line and the main unit speaker (send level:
max)
5
Used to send the selected signal to the line
and the main unit speaker (send level: soft
SW setting)
and the main unit speaker (send level: soft
SW setting)
Sim No.
Easy Mode
In
st
a
lla
ti
o
n
Main
te
nance
Adjus
tm
e
nt and
Set
ti
ngs
1
: ‘16/Sep.
1
1
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man6) service manuals if exist.