MX-5050N, MX-5050V, MX-5070N, MX-5070V, MX-6050N, MX-6050V, MX-6070N, MX-6070V (serv.man6). Service Manual (Revised November 2017). - Sharp Copying Equipment Service Manual (repair manual). Page 108

MX-6070N  SIMULATION  6 – 1

MX-6070N

Service Manual

 

The simulation mode has the following functions, to display the
machine operating status, identify the trouble position and causes
in an earlier stage and to efficiently setup and adjust the machine
for improved serviceability.
1) Various adjustments
2) Setting of the specifications and functions
3) Canceling troubles
4) Operation check
5) Counters check, setting clear
6) Machine operating conditions (operation hysteresis) data

check, clear

7) Various (adjustments, setting, operation, counters, etc) data

transport.

The operating procedures and displays depend on the design of
the operation panel of the machine.

Simulation mode

Entering the simulation mode.
1) Double-click the HOME key
2) Touch the Ver display section (10-key mode input mode

screen)

3)

Touch the (#) key → Asterisk (*) key → Clear key → Asterisk
(*) key → Ready for input of main code of simulation. 

Easy mode

Displays commonly used simulations for each category, 
allowing easy access for technicians to change settings, 
perform maintenance and adjustments.

Classic mode

All simulations are listed and can be accessed by entering 
the main code, then sub code as per previous model series.

1

TEST key

Change test mode

2

Mode setting key

Change Easy mode, Classic mode

3

Language setting key

Change language in simulation mode

4

INFO key

Display operation of current display

5

EXIT key

Exit from simulation mode

6

BACK key

Back to the previous display

7

Clear key

Clear input value

1

2 3 4

5

6

7

Ver