Read Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man5) Service Manual online
MX-6070V SIMULATION 6 – 18
6-2
Purpose
Operation test/check
Function (Purpose)
Used to check the operations of each fan
motor and its control circuit.
motor and its control circuit.
Section
Others
Operation/Procedure
1) Select the item to be operation checked with the touch panel
1) Select the item to be operation checked with the touch panel
key.
2) Press [EXECUTE] key.
The selected load performs the operation.
When [EXECUTE] key is pressed, the operation is terminated.
Press [ALL] key to select all the fans collectively.
When [EXECUTE] key is pressed, the operation is terminated.
Press [ALL] key to select all the fans collectively.
Load operation check method:
The load operation is checked by the operation sound. However,
there are some loads which cannot be checked with the operation
sound.
The load operation is checked by the operation sound. However,
there are some loads which cannot be checked with the operation
sound.
6-3
Purpose
Operation test/check
Function (Purpose)
Used to check the operations of the trans-
port unit and the control circuit.
port unit and the control circuit.
Section
Process (Transport)
Operation/Procedure
1) Select the operation mode with the mode select button.
1) Select the operation mode with the mode select button.
2) When [EXECUTE] key is pressed, the operation of the mode
selected in 1) is performed.
6-4
Purpose
Operation test/check
Function (Purpose)
Used to check the cleaning operation of the
main charger
main charger
Section
Process
Operation/Procedure
1)
1)
Select the items to be checked with the touch panel key
2)
Press [EXECUTE] key
6-6
Purpose
Operation test/check
Function (Purpose)
Used to perform fusing pressure release
and applying, and to check the operations
of the control circuits.
and applying, and to check the operations
of the control circuits.
Section
Fusing
Operation/Procedure
1)
1)
Press [FUSER] key to highlight it.
2)
Press [EXECUTE] key, and fusing pressure applying and fus-
ing pressure release are repeated.
ing pressure release are repeated.
During this period, the status of the fusing roller pressure is dis-
played.
played.
6-90
Purpose
Setting
Function (Purpose)
Used to reset the machine to the factory
setting. (The scanner is set to the lock
enable position)
setting. (The scanner is set to the lock
enable position)
Section
Scanner
Operation/Procedure
1)
1)
Press [EXECUTE] key.
The scanner is shifted to the lock enable position and stopped.
The scanner is shifted to the lock enable position and stopped.
7
7-1
Purpose
Setting
Function (Purpose)
Used to set the operating conditions of
aging.
aging.
Section
Others
Operation/Procedure
1)
1)
Select an item to be set with the touch panel key.
2)
Press [EXECUTE] key.
The machine is rebooted in the aging mode.
The machine is rebooted in the aging mode.
The aging operation condition set by this mode is maintained here-
after unless the power is turned off or the setting is changed.
after unless the power is turned off or the setting is changed.
Display
Content
FUFM
Fusing cooling fan
POFM2
Paper exit cooling fan
PROFM1
Process fan 1
PROFM2
Process fan 2
PSFM
Power cooling fan
Mode select button
Content
TC1
Primary transfer (normal rotation)
TC1_R
Primary transfer (reverse rotation)
TC2
Secondary transfer
Mode
select
button
Mode
display
Content
NOTE
TC1
BLACK
Monochrome
mode position
mode position
Black mode position -> Color
mode position -> Drum
separation position -> (Black
mode position)
(Repeated in this sequence.)
mode position -> Drum
separation position -> (Black
mode position)
(Repeated in this sequence.)
COLOR
Color mode
position
position
FREE
Non-transport
position
position
TC1_R
BLACK
Monochrome
mode position
mode position
Black mode position -> Drum
separation position -> Color
mode position -> (Black mode
position) (Repeated in this
sequence.)
separation position -> Color
mode position -> (Black mode
position) (Repeated in this
sequence.)
FREE
Non-transport
position
position
COLOR
Color mode
position
position
TC2
PRINT
Print position
Print position -> Drum
separation position
(Repeated in this sequence)
separation position
(Repeated in this sequence)
FREE
Non-transport
position
position
MC (K) COUNT
Main charger cleaner operation check
MC (C) COUNT
MC (M) COUNT
MC (Y) COUNT
ALL
MC (M) COUNT
MC (Y) COUNT
ALL
All color
PRINT
Fusing pressure
applying
applying
Fusing pressure applying -> Fusing
pressure release -> (Fusing pressure
applying) The operation is repeated.
pressure release -> (Fusing pressure
applying) The operation is repeated.
FREE
Fusing pressure
release
release
AGING
Aging operation setup
INTERVAL
Intermittent operation setting
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man5) service manuals if exist.