Read Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man2) Handy Guide online
TEST SIMULATION
SHARP
60
63
CCD Operation & Adjustment
01 Shading correction data display
02 Shading correction execution (force)
03 CCD gamma & colour correction adjustment
04 Scanner test chart patch density list display
05 CCD colour balance & gamma default setting
07 Register the standard target of copy mode
02 Shading correction execution (force)
03 CCD gamma & colour correction adjustment
04 Scanner test chart patch density list display
05 CCD colour balance & gamma default setting
07 Register the standard target of copy mode
auto colour balance adjustment (Service)
08 Set the standard copy mode auto colour
balance target to factory default (Service)
11 Set the standard target colour balance
adjustment (Factory)
64
Self-Test Print
01 Test print (Colour mode)
02 Test print (B/W mode)
04 Printer self-print test
05 Printer self-print test (PCL)
06 Printer self-print test (PS)
02 Test print (B/W mode)
04 Printer self-print test
05 Printer self-print test (PCL)
06 Printer self-print test (PS)
65
LCD Operation & Adjustment
01 LCD touch panel adjustment
02 LCD touch panel adjustment result display
05 Operation panel key input test
02 LCD touch panel adjustment result display
05 Operation panel key input test
66
Fax Control Settings & Adjustments
01 Fax Soft SW setting
SW24
Communication Signal sending level
(bits 1-8)
(bits 1-8)
SW27-4
V.34 mode function (call arrival):
0 = V.34 valid, 1 = V.34 invalid.
0 = V.34 valid, 1 = V.34 invalid.
SW27-5
V.34 mode function (polling when
calling):
0 = V.34 valid, 1 = V.34 invalid.
calling):
0 = V.34 valid, 1 = V.34 invalid.
SW27-6
V.34 mode function (manual
communication):
0 = V.34 valid. 1 = V.34 invalid.
communication):
0 = V.34 valid. 1 = V.34 invalid.
SW33-6,
SW33-7;
SW33-7;
Transmission cable amplitude
equaliser:-
00 = 0dB, 01 = 4dB
10 = 8dB, 11 = 12dB
equaliser:-
00 = 0dB, 01 = 4dB
10 = 8dB, 11 = 12dB
02 Country code default set (Fax)
03 Fax PWB (modem) controller memory check
04 Fax signal line check (Max level)
05 Fax signal line check (Soft SW setting level)
06 Fax list print (confidential registration)
07 Fax image memory printout (all data)
08 Fax sound message setup
03 Fax PWB (modem) controller memory check
04 Fax signal line check (Max level)
05 Fax signal line check (Soft SW setting level)
06 Fax list print (confidential registration)
07 Fax image memory printout (all data)
08 Fax sound message setup
66
Fax Control Settings & Adjustments
09 Fax signal line check (Soft SW setting)
10 Fax & Image data all memory clear
11 Voice signal check (line/speaker 300bps)
12 Voice signal check (line/speaker 300bps)
13 Register dial number for Sim 66-14/15/16
14 Adjust/check the time dial pulse (10bps)
15 Adjust/check the time dial pulse (20bps)
16 Adjust/check the send level DTFM signal
17 DTFM signal to send to line (Max level)
18 DTFM signal to send to line (Soft SW level)
21 Print various registration information
22 Set the sound volume of the handset (Japan)
29 Fax address book clear
30 Tel/LIU sensor status check
31 ON/OFF setting of output port (Tel/LIU)
32 Received data check (comparison)
33 Busy Tone/CNG/CED/FNET detect check
36 Check Send/Receive from modem.
39 Check Destination saved in Fax EEPROM
42 Rewrite PIC program installed on Fax box
43 Write program & adjustment values to PIC
10 Fax & Image data all memory clear
11 Voice signal check (line/speaker 300bps)
12 Voice signal check (line/speaker 300bps)
13 Register dial number for Sim 66-14/15/16
14 Adjust/check the time dial pulse (10bps)
15 Adjust/check the time dial pulse (20bps)
16 Adjust/check the send level DTFM signal
17 DTFM signal to send to line (Max level)
18 DTFM signal to send to line (Soft SW level)
21 Print various registration information
22 Set the sound volume of the handset (Japan)
29 Fax address book clear
30 Tel/LIU sensor status check
31 ON/OFF setting of output port (Tel/LIU)
32 Received data check (comparison)
33 Busy Tone/CNG/CED/FNET detect check
36 Check Send/Receive from modem.
39 Check Destination saved in Fax EEPROM
42 Rewrite PIC program installed on Fax box
43 Write program & adjustment values to PIC
installed on Fax
61 Display FAX related soft switch (151-250)
62 FAX receive data export in PDF format.
62 FAX receive data export in PDF format.
67
Printer Settings & Adjustments
17 Printer NVRAM clear
24 Printer colour balance auto adjustment
25 Printer colour balance manual adjustment
26 Set the target colour balance for printer
24 Printer colour balance auto adjustment
25 Printer colour balance manual adjustment
26 Set the target colour balance for printer
mode auto colour adjustment
27 Set the target colour balance for printer
mode auto colour adjustment (Service)
28 Set the printer mode auto colour adjustment
back to factory default (Service)
31 Printer calibration data clear
33 Printer screen gamma adjust. (PCL/PS)
34 Printer maximum density adjustment mode
36 Adjust the density in printer low density
33 Printer screen gamma adjust. (PCL/PS)
34 Printer maximum density adjustment mode
36 Adjust the density in printer low density
areas
41 2 colour print setup
42 2 colour print density setup
43 2 colour mode colour balance adjustment for
42 2 colour print density setup
43 2 colour mode colour balance adjustment for
printer
52 Printer default gamma check (PCL/PS)
54 Printer colour balance adjustment
54 Printer colour balance adjustment
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man2) service manuals if exist.