Read Sharp MX-4140N / MX-4141N / MX-5140N / MX-5141N (serv.man77) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
2/4
[Description]
No. Item
Details
1 Specification
Support for Scan accessory kit MX-AP14
2
Support for parts
change
change
Adjustment for change in manufacturer of SCAN ASIC on DSPF PWB
(from Medusa to Gorgon)
(from Medusa to Gorgon)
3
Main unit control
Modification of U7 trouble due to excess amount of time required for activation process to
register vast amount of job log
register vast amount of job log
4
Main unit control
Modification of L8-20 which may occur when condition signaling between internal
modules is not done properly.
modules is not done properly.
5
Main unit control
Modification of a problem which occurs with following steps: 1) Print out a test pattern in
Paper Settings from Bypass tray in duplex. 2) The Bypass tray gets empty 3) Add papers
to the bypass tray. 4) The test pattern is printed in simplex.
Paper Settings from Bypass tray in duplex. 2) The Bypass tray gets empty 3) Add papers
to the bypass tray. 4) The test pattern is printed in simplex.
6
Main unit control
Modification of L8-20 error which may occur while printing the data with USB connection
to PC
to PC
7
Main unit control
Modification of a failure to turn to Ready state and machine lock up etc.
The problems occurs because the module which controls real-time clock (RTC) in ICU is
not activated properly.
The problems occurs because the module which controls real-time clock (RTC) in ICU is
not activated properly.
8
Main unit control
Modification of a failure to activate the unit properly while acquiring the image (snapshot)
during the firmware upgrade due to lack of some data necessary.
during the firmware upgrade due to lack of some data necessary.
9
Main unit control
Modification of Scan job which keep remaining internally. The problem occurs if Eco scan
setting was enabled but canceled after previewing for Copy job.
setting was enabled but canceled after previewing for Copy job.
10
Main unit control
Modification of discontinuance of Fax data transmission due to limitation and deletion of
Print job.
These problem may occur due to the improper internal processing for job completion.
Print job.
These problem may occur due to the improper internal processing for job completion.
11
Main unit control
Laser power adjustment control according to the gradation of each machine-specific has
been added to improve the color stability of the halftone density.
*Note:
Color balance adjustment needs to be executed after changing the following Soft SW to
enable this setting when updating the firmware in the field.
If the set value has already been changed individually for the support of image quality
before the firmware update, please return the value to the default once, and then execute
the color balance adjustment.
[Monochrome/Color laser power adjustment]
SIM55-1 SW No.9 Data No.3
0: OFF
1: ON (Default)
been added to improve the color stability of the halftone density.
*Note:
Color balance adjustment needs to be executed after changing the following Soft SW to
enable this setting when updating the firmware in the field.
If the set value has already been changed individually for the support of image quality
before the firmware update, please return the value to the default once, and then execute
the color balance adjustment.
[Monochrome/Color laser power adjustment]
SIM55-1 SW No.9 Data No.3
0: OFF
1: ON (Default)
12
Main unit control
Change in default environment to apply PTC heater to avoid C4-02 error.
The initial value in SIM8-6 AU is changed from 1 to 3.
*The value above will not be changed when updating the firmware in the field so please
change this value.
The initial value in SIM8-6 AU is changed from 1 to 3.
*The value above will not be changed when updating the firmware in the field so please
change this value.
13 UI
Modification to allow enable/disable "Default Verification Stamp" setting in each mode
separately. (Now it is allowed to set for Fax/I-Fax mode and other modes.)
separately. (Now it is allowed to set for Fax/I-Fax mode and other modes.)
14 UI
Modification of a failure to delete the job completed from Job Status (Direct print from
USB flash drive). User cannot delete the job on the Job Status screen.
USB flash drive). User cannot delete the job on the Job Status screen.
15 OSA
Modification of an error to activate Fax OSA application after recovering from power save
mode
mode
16 Printer
Modification of machine lock up which occurs while spooling particular data including
JPEG image
JPEG image
17
Printer
Modification of a failure to print out particular Excel data which includes TIFF image
18 Printer
Modification of overlapped characters which may appear when data are printed directly
from USB flash drive.
from USB flash drive.
19
Printer
Modification of garbled characters which may appear during the direct print of PDF file
20
Printer
Modification of a failure to print out particular PDF data directly from USB flash drive
Click on the first or last page to see other MX-4140N / MX-4141N / MX-5140N / MX-5141N (serv.man77) service manuals if exist.