Read Sharp MX-4140N / MX-4141N / MX-5140N / MX-5141N (serv.man4) Handy Guide online
Initial Setup
8
SHARP
Document Solution Centre
DEVELOPER SET-UP
Sim 25-02
Auto Developer Adjustment - Select CMYK.
Toner Installation must be performed after Auto Developer Adjustment is
completed.
completed.
**For optimum image quality & performance, it is recommended to setup &
install developer at the customer site.
install developer at the customer site.
Clean LSU Dust Proof Glass.
TONER INSTALLATION & REPLENISHMENT
Install
CMYK
Toner
Cartridges
Caution:
DO NOT open any Exterior Cover, Power OFF/ON or enter Simulation Mode
during Initial Toner Replenishment.
DO NOT open any Exterior Cover, Power OFF/ON or enter Simulation Mode
during Initial Toner Replenishment.
PRODUCT ACTIVATION & FIRMWARE UPGRADE
Activation of Optional Product(s):-
System Settings – Administrator Mode – Product Key.
Sim 22-05
Check Firmware version(s):-
Upgrade to latest version.
INITIAL SETUP
Sim 26-01
Right Tray Installation
Yes/No.
Sim 26-02
LCC Installation (Paper Size):-
A4.
Sim 26-06
Machine Destination.
Sim 26-35
Set Multi Error Counter
Set to 1 (Multi Count).
Sim 26-50
Long Paper Support (up to 1200mm),
0 = Disable, 1 = Enable
.
Sim 26-52
Non Printed Paper Counter Set-up.
Sim 55-03
Process Mixed Original Printing for Duplex:-
SSW 3-6,
SSW 3-6,
0 = Disable, 1 = Enable.
Sim 55-03
Toner Remain Status Display: SSW 22-5,
0 = Disable, 1 = Enable.
System Settings: Adjust Date/Time (Inc. Daylight Saving setting).
Set cassette size by adjusting the guides in the cassette.
Paper Size & Type Setting:-
System Settings – Paper Tray Settings.
Click on the first or last page to see other MX-4140N / MX-4141N / MX-5140N / MX-5141N (serv.man4) service manuals if exist.