Read Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man97) Technical Bulletin online
CCE-1154
[Description]
No.
Item
Details
1
UI
When performing the program registration data which was set to 2-sided print, if
the paper type which was selected as "Disable Duplex" was set up to the tray, in
some cases, the checkmark for 2-sided print setting of the program registration
would be OFF during the process of copying, and then the data would be printed
not on the double-sided but on the single-side. This problem has been corrected.
the paper type which was selected as "Disable Duplex" was set up to the tray, in
some cases, the checkmark for 2-sided print setting of the program registration
would be OFF during the process of copying, and then the data would be printed
not on the double-sided but on the single-side. This problem has been corrected.
2
UI
Transition speed to Fax screen (Reaction speed of the key) has been improved.
It takes too long to switch to Call Programs (in AP) -> Call Programs in Fax mode
right after start-up. This problem is corrected.
It takes too long to switch to Call Programs (in AP) -> Call Programs in Fax mode
right after start-up. This problem is corrected.
3
UI
It took too long to display thumbnail of incoming Fax data on Preview screen. This
problem has been corrected.
problem has been corrected.
4
UI
When there were a lot of custom folders, displaying the user list screen became
slow. This problem has been corrected.
slow. This problem has been corrected.
5
UI
When Document Filing print was prohibited, [Print Now] key in Document Filing
was grayed out. This problem has been corrected.
was grayed out. This problem has been corrected.
6
UI
When printing Hidden Pattern, in some cases, E7-01 error occurred. This problem
has been corrected.
has been corrected.
7
UI
The warning message "Operation is disabled. Please see your administrator for
your assistance." or " This operation is disabled. " was occasionally displayed if
IC card authentication was enabled. This problem has been corrected.
your assistance." or " This operation is disabled. " was occasionally displayed if
IC card authentication was enabled. This problem has been corrected.
8
UI
A Program for Copy mode could not be registered while MFP was in external
authentication mode for OSA. This problem has been corrected.
authentication mode for OSA. This problem has been corrected.
9
UI
If IC card was used for login while external authentication for OSA is enabled, the
home screen indicated no authentication. This problem has been corrected.
home screen indicated no authentication. This problem has been corrected.
10 UI
Sometimes background image garbled while displaying an error message on
popup in OSA mode. This problem has been corrected.
popup in OSA mode. This problem has been corrected.
11 UI
It was not possible to force the switching of paper tray while MFP was connected
to vending machine using parallel cable. This problem has been corrected.
to vending machine using parallel cable. This problem has been corrected.
12 Main unit
In some cases, MFP was unable to recover from deep sleep. This problem has
been corrected.
been corrected.
13 Main unit
If IC card reader was connected to MFP using USB cable, in some cases, MFP was
unable to recover from Power-Save mode. This problem is corrected.
unable to recover from Power-Save mode. This problem is corrected.
14 Main unit
When PC and MFP were connected via USB cable, MFP had some troubles such
as unable to recover from power-save mode etc... Those problems have been
corrected.
as unable to recover from power-save mode etc... Those problems have been
corrected.
15 Authentication
When Caps Lock is ON on the hardware keyboard, in some cases, the
authentication error occurred when authenticating with the card. This problem
has been corrected.
authentication error occurred when authenticating with the card. This problem
has been corrected.
16 Authentication
Modification has been made to be able to select by Soft SW whether to
authenticate the user already logged in by being authenticated with Active
Directory or not when receiving the print data.
Sim55-3 SW No.30 Data5
0: Authenticate (Default)
1: Not authenticate
authenticate the user already logged in by being authenticated with Active
Directory or not when receiving the print data.
Sim55-3 SW No.30 Data5
0: Authenticate (Default)
1: Not authenticate
17 OSA
If the first character of PC name was the number (0-9), in some cases, it was not
possible to connect to PC when OSA was activated.
possible to connect to PC when OSA was activated.
18 OSA
When reading the card containing the keyboard information like Shift etc using
OSA application, the shift data would be displayed on the operation panel as the
garbage information. This problem has been corrected.
OSA application, the shift data would be displayed on the operation panel as the
garbage information. This problem has been corrected.
19 OSA
When using Equitrac environment, the Auto Logout occasionally did not function
even when leaving the machine after logging in to the application. This problem
has been corrected.
even when leaving the machine after logging in to the application. This problem
has been corrected.
20 Simulation
Due to taking too long to collect the data for eco power control, the processing of
other execution jobs was occasionally disturbed (e.g. unable to output the FAX
receiving data etc). As the countermeasure, modification has been made to
other execution jobs was occasionally disturbed (e.g. unable to output the FAX
receiving data etc). As the countermeasure, modification has been made to
Click on the first or last page to see other MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man97) service manuals if exist.