Read Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man144) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-872
1. Installation
Important
Before installation, be sure to turn OFF the power
switch of the operation panel, turn OFF the main
power switch of the machine, and disconnect the
power plug from the power outlet. Check to confirm
that the data lamp is not lighting or flashing before
execution of installation.
A. Remove the exterior covers.
1) Remove the front cabinet upper.
2) Remove the lower cover of the operation panel.
3) Remove the upper cover of the operation panel.
B. Attachment to the IC card reader holder
1) Attach the card reader fixing tape to the IC card
reader holder referring to the notches as the
reference.
reference.
Important
The holder type and the attachment procedure differ
depending on the kind of the IC card reader.
Vertical direction:
Fit with the notch.
Horizontal direction:
Fit with the notch and
the lower edge.
Fit with the notch.
Horizontal direction:
Fit with the notch and
the lower edge.
Vertical and
horizontal directions:
Fit with the notches.
horizontal directions:
Fit with the notches.
2) Cut out the boss.
Important
The cutting position of the boss of the IC card reader
holder differs depending on the kind of the IC card
reader.
Click on the first or last page to see other MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man144) service manuals if exist.