MX-4110N, MX-4111N, MX-4112N, MX-4110FN, MX-4111FN, MX-5110N, MX-5111N, MX-5112N, MX-5110FN, MX-5111FN (serv.man143). ROM UPGRADE ... (3). Ver. 0400R10a - Sharp Copying Equipment Technical Bulletin (repair manual)

mx-4110n, mx-4111n, mx-4112n, mx-4110fn, mx-4111fn, mx-5110n, mx-5111n, mx-5112n, mx-5110fn, mx-5111fn (serv.man143) technical bulletin
Model
MX-4110N MX-4111N MX-4112N MX-4110FN MX-4111FN MX-5110N MX-5111N MX-5112N MX-5110FN MX-5111FN (serv.man143)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
104.54 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / ROM UPGRADE ... (3). Ver. 0400R10a
File
mx-4110n-mx-4111n-mx-4112n-mx-4110fn-mx-4111fn-mx-.pdf
Date

Read Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man143) Technical Bulletin online

 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
CCE 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1. Model Name:  MX4112N – MX5112N 
 
2. Description:  Upgrade of ICU, PCL, PCU, SCU-ROM, and E-Manual 
 
From mid-September 2011 production  
ROM control No. 
ICU 
PCL 
PCU 
SCU 
FAX 
E-Manual 
D00 
0400R10a  0400R100  0105R10a  0102R100  0100G100  0151R100 
 * ICU above is the version described in the ROM management label.  Check that the actual  
  version is: ICU (MAIN): 04.00.R1.0a/ICU(BOOT): 01.00.R1.00/ICU(SUB): 01.03.R1.0a/ 
  LANGUAGE: 01.41.A1.00/GRAPHIC: 01.00.A1.00/UICONTENTS: 04.00.R1.00; by SIM22-5.  
 * PCL above is also the version described in the ROM management label. 
  Check that the actual version is: PCL (MAIN): 04.00.R1.00/PCL (PROFILE): 01.00.R1.00;  
  by SIM22-5.  
  Item of change : See the attached sheets. 
 
 
 
 
 
ROM Version Combination History Table 
 
No 
ROM 
control No. 
ICU 
PCL 
PCU 
SCU 
FAX 
E-Manual 
Action 
(2) 
C00 
0300R1 
0300R1 
0104R1 
0101R1 
0100G1 
0140R1 
2011/7 
(1) 
B01 
0201R1 
0200R1 
0103R1 
0101R1 
0100G1 
0130R1 
2011/5 Mid 
 
 
ROM UPGRADE ..... (3). Ver. 0400R10a
 
TECHNICAL BULLETIN 
 
Date:  
17
th
 October 2011 
Model:  
MX4112N – MX5112N 
Ref.:   
007 
Colour:  
White 
Page:  
1 of 3 
 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
CCE 
 
[Description] 
No. 
Item 
Details 
1  UI 
When displaying the icon of the maintenance information, if it conflicted with other icon 
displaying condition like the icon of "Processing print data" etc, the icons were displayed 
by switching back and force.  Now it has been modified to display the icon of the 
maintenance information all the time until the maintenance procedure is completed. 
2  Document Filling 
There was a case where the B/W data in Document Filling could not be printed from 
"Document Operations" on the Web screen with the user authority that the colour print of 
Document Filling was disabled.  This problem has been corrected.   
3  Document Filling 
After the several retention prints, when confirming the print job from the main unit of 
MFP and then pressing the "Select All" button, the candidate list might disappear.   
This problem has been corrected.   
4  OSA 
When performing the advanced preview scan on the SharpOSA-CANVAS cooperative 
system, the data was scanned with the previous original size when re-loading during the 
read operation at OC.  This problem has been corrected. 
5  OSA 
If SPF jam occurred when performing the advanced preview scan on the SharpOSA-
CANVAS cooperative system, either "Re-reading" or "Job Cancel" should have been 
executed, however, "Start Button" could also be pressed.  This problem has been 
corrected. 
6  Web Page 
The list of the Address Book from the Web Page of the main unit was not displayed in 
the order of the search string.  This problem has been corrected. 
7  Web Page 
When executing the connection test of LDAP under Quick Settings of Network Settings 
on Web Page, the error occurred even though it was properly connected.  This problem 
has been corrected.   
8  Main Unit 
With NAS function enabled when taking the PDF etc in to the shared folder of NAS, and 
then printing that file, the file with IP address of MFP was newly created in the shared 
folder.  This problem has been corrected. 
9  Main Unit 
When printing on the plain paper after printing on the heavy paper, transparency film, 
envelop, or glossy paper, E7-20 error might occur.  This problem has been corrected.  
10  Copier 
When the Copy key was pressed after placing the original on the document feeder, the 
copy key command would be processed first before the processing to determine the 
paper size on the document feeder, and as the result of it, the original was scanned from 
the document glass, which might cause the "blank page" output.  This problem has been 
corrected.   
11  Copier 
When performing the "Position Image" if the data was read from the document feeder 
and also the size of original was bigger than the paper size, a part of the data on the 
original was missing as the print result.  This problem has been corrected. 
12  FAX 
Upon reception of the Fax, E7-91 error (Fax receiving image trouble) might occur after 
the occurrence of NG 169930 error (communication trouble between MFP controller and 
modem controller).  This problem has been corrected. 
13  FAX 
When sending the FAX with Timer function, there were some cases where the data 
sending did not start.  This problem has been corrected. 
14   Image Send  
If the window size of the recipient becomes full when sending the direct SMTP, the 
wrong 1-byte data might be sent out, which caused E7-93(8F) at the recipient side.  This 
problem has been corrected. 
15  Image Send 
After the occurrence of I-Fax reception error, the machine might hang up by the 
message "Please wait" upon the power OFF/ON.  This problem has been corrected.    
16  Printer 
There were some cases where the model information of the option desk could not 
correctly be taken when outputting the prints (with the option desk installed), and in this 
case, the image handling was carried out with the option configuration of the tray being 
recognized falsely.  This problem has been corrected. 
 
 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
CCE 
 
 
No. 
Item 
Details 
17   Scanner 
As the countermeasure for the lines when scanning the data from the document feeder, 
we have added the mode (except when the paper jam occurs) to search the most 
uncontaminated scan position on start-up (when power ON) and also on completion of 
scanning the job from the document feeder to the Soft SW so that it becomes possible 
to scan from the most uncontaminated scan position from the next scanning of the job 
from the document feeder. 
 
Scanner Control Soft SW (Sim55-2) 
SW No. 8  Data 1, 2, 3 
 
0, 0, 0: [ON] both on start-up/on completion of the job (Default)  
0, 0, 1: [ON] only on start-up    
0, 1, 0: [ON] only on completion of the job 
1, 0, 0: [OFF] both on start-up/on completion of the job 
18  Network 
When the machine entered to the Power Saving mode with LAN being disconnected, the 
communication became impossible even though LAN was connected afterward.  This 
problem has been corrected. 
19  Simulation  
Factory default setting of Sim26-32 "Fusing cleaning operation spec settings" has been 
changed from "1: NO" to "0: YES".   
20 
Toner 
Replenishment 
Control 
The reduction of toner concentration is detected under the environment of the low copy 
volume but there were some cases where the DV recovery mode by the process control 
except the process control for the travelling distance was not performed.  This problem 
has been corrected. 
21 
Toner 
Replenishment 
Control 
There were some cases where "F2-6x" trouble was caused when the toner could not be 
replenished within a set time due to the imbalance of the toner etc.  For the 
countermeasures of this problem, the modification has been made to prevent from the 
false determination of "F2-6x" by performing the toner replenishment operation again 
when the machine detects that the
 
toner dispense rate is not enough.   
22  Others 
"Eup Lot4" that is one of the European environment standards has now been supported. 
 
Page of 3
Display

Download Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man143) Technical Bulletin

Here you can read online and download Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man143) Technical Bulletin in PDF. MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man143) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man143) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.