Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man35) Service Manual online
MX-4101N PWB SECTION P – 2
* Inserting position an inserting procedure when the DIMM
memory is removed
DIMM1: Option
DIMM2: 1GB
DIMM3: 512MB
DIMM4: Reserved (No option)
DIMM5: 512MB
DIMM2: 1GB
DIMM3: 512MB
DIMM4: Reserved (No option)
DIMM5: 512MB
3)
Stopper (A) with your finger to release the lock of the memory
PWB.
PWB.
4)
When the lock is released, the memory PWB tilts. Pull it out
under that state.
* Be sure to release the lock before pulling it out.
* Do not touch the IC on the memory PWB.
under that state.
* Be sure to release the lock before pulling it out.
* Do not touch the IC on the memory PWB.
* Note for removing procedure of the memory PWB
Remove the PWB inside the tilt of the memory PWB first.
(Removing the IC outside the tilt will result in poor efficiency
of work.)
(Removing the IC outside the tilt will result in poor efficiency
of work.)
* Note for installing procedure of the memory PWB
Install the PWB outside the tilt of the memory PWB first.
(Installing the IC inside the tilt will result in poor efficiency
of work.)
(Installing the IC inside the tilt will result in poor efficiency
of work.)
a)
Tilt the memory PWB and fit with the connector port. Put
the memory PWB up to the line (A) in the figure.
* When inserting, be sure to hold the both ends and be
the memory PWB up to the line (A) in the figure.
* When inserting, be sure to hold the both ends and be
sure not to touch the IC on the PWB.
b)
Push the memory PWB which is kept tilted fully to the
bottom.
* Be careful not to tilt left and right.
* The gold plated section must be hidden.
bottom.
* Be careful not to tilt left and right.
* The gold plated section must be hidden.
DIMM1
DIMM2
DIMM3
DIMM4
DIMM5
A
A
Inside
Outside
Inside
Outside
Inside
Outside
Inside
Outside
A
About 15
[ Tilting left and right ]
[ The gold plated
section can be seen ]
section can be seen ]
[ Normal ]
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man35) service manuals if exist.