Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man32) Service Manual online
MX-4101N FUSER SECTION M – 5
(4) Upper heater lamp
1)
Remove the fusing unit.
2)
Remove the fusing upper cover.
3)
Remove the fusing upper cover FAS.
4)
Remove the screw, and remove the upper lamp holder F. Dis-
connect the lamp connector on the rear side, and remove the
upper lamp harness from the upper lamp holder R.
connect the lamp connector on the rear side, and remove the
upper lamp harness from the upper lamp holder R.
5)
Disconnect the connector on the front side of the upper heater
lamp, and remove the upper heater lamp from the front side.
lamp, and remove the upper heater lamp from the front side.
NOTE: When installing, check to confirm that the harness color on
the rear side is red.
NOTE: When installing, check to confirm that the section (A) of the
lower heater lamp is securely engaged with the lamp
holder.
holder.
(5) Lower heater lamp
1)
Remove the fusing unit.
2)
Remove the fusing upper cover.
3)
Remove the fusing lower cover.
4)
Remove the screw, and remove the clamp, the fusing upper
cover RAS, and the lower lamp holder F/R.
cover RAS, and the lower lamp holder F/R.
NOTE: The lamp harness is engaged with the fusing upper cover
RAS. Remove the lamp harness.
NOTE: When installing the clamp, put it on the left side away from
the lamp.
RED
WHITE
A
A
A
A
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man32) service manuals if exist.