Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man22) Service Manual online
MX-4101N DSPF SECTION C – 8
(1) DSPF paper feed clutch
1)
Remove the front cabinet.
2)
Remove the rear cabinet.
3)
Remove the paper feed cover.
4)
Remove the paper feed unit.
5)
Remove the pawl, and remove the paper feed PG upper cover.
6)
Disconnect the connector. Remove the screw, and remove the
paper feed PG upper supporting plate.
paper feed PG upper supporting plate.
7)
Remove the E-ring and the bearing. Lift the paper feed roller
shaft diagonally, and remove the DSPF paper feed clutch.
shaft diagonally, and remove the DSPF paper feed clutch.
* When assembling, check to insure that the clutch rotation stop-
per is engaged with the plate.
D. Transport section
(1) DSPF No.1 resist roller clutch
1)
Remove the rear cabinet.
2)
Disconnect the connector. Remove the clutch stopper (a), and
remove the DSPF No.1 resist roller clutch (b).
remove the DSPF No.1 resist roller clutch (b).
* When assembling, check to insure that the clutch rotation stop-
per is engaged with the plate.
(2) DSPF transport roller clutch
1)
Remove the rear cabinet.
2)
Disconnect the connector, and remove the snap band.
Remove the resin E-ring, and remove the DSPF transport
roller clutch.
Remove the resin E-ring, and remove the DSPF transport
roller clutch.
* When assembling, check to insure that the clutch rotation stop-
per is engaged with the plate.
1
2
1
2
3
Parts
a
DSPF No.1 resist roller clutch
b
DSPF transport roller clutch
c
DSPF No.2 resist roller clutch
a
c
b
1
2
b
a
1
2
3
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man22) service manuals if exist.