Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man16) Service Manual online
MX-4101N MAINTENANCE 8 – 28
2)
Remove the screw, and remove the terminal on the primary
side of the thermostat (2 positions).
Disconnect the connector of the thermistor.
side of the thermostat (2 positions).
Disconnect the connector of the thermistor.
3)
Remove two external heating springs, and disengage the hook
and remove the external heating unit.
(External heading spring) Maintenance: Replace at every
300K.
and remove the external heating unit.
(External heading spring) Maintenance: Replace at every
300K.
4)
Remove the screw, and remove the external lamp holder.
5)
Remove the screw and remove the terminal. Pull out the exter-
nal heater lamp.
nal heater lamp.
6)
Remove the step screw, and remove the external heating roller
bearing (A). Turn the external heating collar (B) and remove
the external heating roller (C) and the external belt (D).
Maintenance: Replace at every 300K.
bearing (A). Turn the external heating collar (B) and remove
the external heating roller (C) and the external belt (D).
Maintenance: Replace at every 300K.
COLOR:WHITE
COLOR:RED
A
A
B
C
D
B
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man16) service manuals if exist.