Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man148) Technical Bulletin online
*1: The e-Manual cannot be backed up, but can be reinstalled by using SIM49-3 and USB memory.
*2: Watermark data cannot be backed up, but can be reinstalled by using Sim49-5 and USB memory
*2: Watermark data cannot be backed up, but can be reinstalled by using Sim49-5 and USB memory
(2)
Replacement procedures when HDD data can be backed up
a.
Work contents and procedures
Procedures
When a new HDD
(blank HDD, service part) is
used, or when a HDD which
is normal but a program
error occurs in it is used.
When a used HDD
(used in the same
model) is used *
Step 1
Back up the HDD storage data before replacement.
(Servicing)
Use SIM56-2 or the device cloning, or the storage
backup function to backup the data. (Back up the data to
the USB memory.)
(Backup enable data: HDD storage data list No. 2, 3, 4
(Address book, Image send series registration data, User
authentication data)
Step 2
Back up the HDD storage data before replacement. (User
or servicing)
Back up the data to PC with Web page.
(Backup enable data: HDD storage data list No. 7, 10, 14
(Document filing data, JOB LOG data, Input profile)
Step 3
Replace the HDD.
Step 4
Reinstall the firmware
(program) in the boot mode.
Use SIM49-1 to reinstall
the firmware (program).
Step 5
Boot the complex machine.
Formatting is
automatically performed.
Boot the complex
machine.
,
e
d
o
c
e
l
b
u
o
rt
e
h
T
7
p
e
t
s
o
T
6
p
e
t
S
U2-05, is displayed.
Cancel with SIM16.
Step 7
Since a blank HDD is
automatically formatted, there
is no need to perform
formatting procedure with
SIM.
Use SIM62-1 to format
the HDD.
Step 8
Use SIM66-10 to clear the FAX image memory. The
memory is cleared in order to keep compliance between
the HDD data and the image related memory and to
prevent malfunctions. (The memory must be cleared not
only in the FAX model but in the scanner and the Internet
Fax models.)
Step 9
Use SIM49-3 to install the manual data to the HDD.
Step 10
The trouble code, U2-60 is displayed Use Sim49-5 to
install the watermark data to the HDD After booting
the machine, use Sim16 to cancel the U2-60 trouble.
the machine, use Sim16 to cancel the U2-60 trouble.
Step 11
Import the data backed up in Step 1.
Use SIM56-2, or the device cloning, or the storage
backup to import.
(Import enable data: HDD storage data list No. 2, 3, 4
(Address book, Image send series registration data, User
authentication data)
Step 12
Import the data backed up with the Web page function in
Step 2.
Import enable data: Document filing data, Input profile,
Output profile, User font, Use macro
(The JOB LOG data can be backed up but cannot be
imported.)
(3)
Replacement procedures when the HDD storage data cannot be backed up due to breakdown
a.
Display when HDD breakdown
When the machine is booted with the HDD broken down, the following operation and the display are made.
1)
When the power is turned ON, the main program error is displayed.
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man148) service manuals if exist.