Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man147) Technical Bulletin online
[Description]
No. Subject
Description
1
Main body control-
related
related
The MFP screen would go blank and the MFP would fail to recover from power save
mode if the MFP was in received fax preview mode and an attempt was made to recover
the MFP from power save mode—either by a fax being received or by the user pressing
the Power Save key—when 10 minutes or more had elapsed since the MFP entered
power save mode after receiving a fax and retaining received data. This glitch has been
corrected.
mode if the MFP was in received fax preview mode and an attempt was made to recover
the MFP from power save mode—either by a fax being received or by the user pressing
the Power Save key—when 10 minutes or more had elapsed since the MFP entered
power save mode after receiving a fax and retaining received data. This glitch has been
corrected.
2
Main body control-
related
related
System time would automatically revert to a date roughly five years, five months, and
eight days in the past for a period of at least 1 minute when the home, system
configuration, or preview screens were operated after the power was turned on and then
operated again around 6 hours later. This glitch has been corrected.
eight days in the past for a period of at least 1 minute when the home, system
configuration, or preview screens were operated after the power was turned on and then
operated again around 6 hours later. This glitch has been corrected.
3
Main body control-
related
related
If the MFP main body is returned from the power saving status after the USB memory is
inserted, the USB memory may not be recognized. This glitch has been corrected.
inserted, the USB memory may not be recognized. This glitch has been corrected.
4 Jam-related
When FAX-received data of less than 3 lines is output, PPD2_PRI jam may occur. This
glitch has been corrected.
glitch has been corrected.
5
Fusing control-
relationship
relationship
Fusing control has been changed so that the fusing pressure release amount can be
changed in envelop mode to solve the envelop fusing fault.
changed in envelop mode to solve the envelop fusing fault.
The fusing pressure release amount can be changed by the setting of the following engine
software switch.
software switch.
Engine software switch (Sim55-1) SW No.:12 Bit: 1,2,3
6 UI-related
A software switch has been added that enables the LCD display characters of this main
body to be switched to bold characters.
body to be switched to bold characters.
Controller software switch (SIM 55-3) SW No. 22 Data bit 7
0: Standard (default)
1: Bold characters
7 UI-related
Color items of "document filing print" have been added to the total paper usage count
display screen.
display screen.
8 UI-related
The operation panel screen display setting has been changed so that when the panel
switch is turned off, the operation panel screen disappears after fusing pressure is released.
switch is turned off, the operation panel screen disappears after fusing pressure is released.
9 Printer-related
When copying the character string specified in PJL, the memory occasionally corrupts
because the buffer size is small, resulting in incomplete printing from MacOS 10.5.6. This
glitch has been corrected.
because the buffer size is small, resulting in incomplete printing from MacOS 10.5.6. This
glitch has been corrected.
10 Printer-related
If ESC/P raster data (barcode data) exists at the end of the page, the data cannot be
registered in the page buffer correctly because the page end processing is performed
before the final raster data processing. If the data cannot be registered in the page buffer
correctly, barcodes may not be printed correctly. This glitch has been corrected.
registered in the page buffer correctly because the page end processing is performed
before the final raster data processing. If the data cannot be registered in the page buffer
correctly, barcodes may not be printed correctly. This glitch has been corrected.
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-679
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man147) service manuals if exist.