Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man143) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-702
[Description]
No. Subject
Description
1
Support for new
standards of the
International Energy
Star program
standards of the
International Energy
Star program
The criteria change of the International Energy Star program involves the following changes:
(1) In the destination setting (Sim26-6), the factory default values for the function of
(1) In the destination setting (Sim26-6), the factory default values for the function of
preheating and auto power shutoff have been changed.
Model
name
Destination
Before change
After change
Preheating
Auto power
shutoff
Preheating
Auto power
shutoff
MX-4100
series
North America/
Europe/Australia/
China
15min. 60min. 1min. 15min.
MX-5000
series
North America/
Europe/Australia/
China
15min. 60min.
Unchanged
(2) A change has been made so that fusing FAN rotation is continued even during
preheating.
(3) A change has been made so that fusing FAN rotation is continued for a predetermined
time even after switching to power shutoff.
Notes:
Updating to this version dose not involve any change of the setting value for the MFP printer.
The time required for the function of preheating and auto power shutoff to be active will
be reset to the factory default value as described above; when a system administrator
performs the operation of saving and/or calling system settings and then resets to the
factory default value, or when “destination change (Sim26-6)” is implemented.
be reset to the factory default value as described above; when a system administrator
performs the operation of saving and/or calling system settings and then resets to the
factory default value, or when “destination change (Sim26-6)” is implemented.
2 UI-related
The one touch key displayed in Customers may disappear if the system returns from 1W
night mode when the default of the basic screen for fax/image transmission is set to
"Address Book" and another one touch key is also registered in Customers. This glitch
has been corrected.
night mode when the default of the basic screen for fax/image transmission is set to
"Address Book" and another one touch key is also registered in Customers. This glitch
has been corrected.
3
Main body control-related
It may be that the when device cloning data for copy job program setting output by the
MX-3500/4500 Series is read, an error occurs and the subsequent data is skipped. This
glitch has been corrected.
MX-3500/4500 Series is read, an error occurs and the subsequent data is skipped. This
glitch has been corrected.
4
Main body control-related
Paper feed operation has been improved to cope with the paper feed/vertical feed jam
and W feed jam.
and W feed jam.
5
Main body control-related
F6-00 may occur if the main body returns from power-on mode or 1W night mode N hours
and 5 minutes (N: 0, 1, 2, 3,…) after from power-off mode or 1W night mode. This glitch
has been corrected. If this trouble code occurs in power-on mode, a power on/off request
message is displayed on the LCD of the main body. The symptom is recovered when the
power is turned off/on. If this trouble code occurs during FAX reception in 1W night mode,
the symptom is recovered when the destination FAX is recalled.
and 5 minutes (N: 0, 1, 2, 3,…) after from power-off mode or 1W night mode. This glitch
has been corrected. If this trouble code occurs in power-on mode, a power on/off request
message is displayed on the LCD of the main body. The symptom is recovered when the
power is turned off/on. If this trouble code occurs during FAX reception in 1W night mode,
the symptom is recovered when the destination FAX is recalled.
In the MX-4100/5000 Series, this glitch hardly occurs due to the hardware configuration.
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man143) service manuals if exist.