MX-4100N, MX-4101N, MX-5000N, MX-5001N (serv.man14). Service Manual-Section 6-Simulations - Sharp Copying Equipment Service Manual (repair manual). Page 4

Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man14) Service Manual online

MX-4101N  SIMULATION  6 – 4
23
2
Used to output the trouble history list of paper jam and misfeed. (If the number of troubles of misfeed is 
considerably great, the judgment is made that repair is required.)
80
Used to check the operation of paper feed and paper transport in the paper feed section and the paper 
transport section. Used to output the list of the operation status of the sensor and the detectors in the 
paper feed section and the paper transport section.
Paper feed, Paper transport
24
1
Used to clear the jam counter, and the trouble counter. (After completion of maintenance, clear the 
counters.)
2
Used to clear the number of use (the number of prints) of each paper feed section.
3
Used to clear the finisher, RSPF, and the scan (reading) unit counter.
4
Used to clear the maintenance counter, the printer counters of the transport unit and the fusing unit. (After 
completion of maintenance, clear the counters.)
5
Used to clear the developer counter. (After replacement of developer, clear the counter.)
6
Used to clear the copy counter.
7
Used to clear the OPC drum counter. (After replacement of the OPC drum, clear the counter.)
9
Used clear the printer mode print counter and the self print mode print counter.
10
Used to clear the FAX counter. (Only when FAX is installed)
15
Used to clear the counters related to the scan mode and the image send.
30
Used to initialize the administrator password.
31
Used to initialize the service mode password.
25
1
Used to check the operations of the developing section.
Process (Developing section)
2
Used to make the initial setting of toner density when replacing developer. (Automatic adjustment)
Image process (Photoconductor/
Developing/Transfer/Cleaning)
26
1
Used to set the paper exit tray (MX-TRX1).
Paper exit
2
Used to set the paper size of the large capacity tray (LCC). (When the paper size is changed, this 
simulation must be executed to change the paper size in software.)
Paper feed
3
Used to set the specifications of the auditor .(Setting must be made according to the auditor use 
conditions.)
Auditor
5
Used to set the count mode of the total counter and the maintenance counter. (A3/11x17 size)
6
Used to set the specifications (paper, fixed magnification ratio, etc.) of the destination.
10
Used to set the trial mode of the network scanner.
18
Used to set Disable/Enable of the toner save mode operation. (For the Japan and the UK versions.)
30
Used to set the operation mode corresponding to the CE mark (Europe safety standards). 
(For slow start to drive the fusing heater lamp)
35
Used to set the display mode of SIM 22-4 trouble history when a same trouble occurred repeatedly. There 
are two display modes: display as one trouble and display as several series of troubles.
38
Used to set Continue/Stop of print when the maintenance life is reached.
41
Used to set Enable/Disable of the magnification ratio automatic select function (AMS) in the center binding 
mode.
49
Used to set the print speed of postcards mode.
50
Used to set functions.
52
Used to set whether non-printed paper (insertion paper, cover paper) is counted up or not.
53
User auto color calibration (color balance adjustment) Inhibit/Allow setting (copy mode)
54
User auto color calibration (color balance adjustment) Inhibit/Allow setting (printer mode)
65
Used to set the finisher alarm mode.
69
Used to set the operating conditions for toner near end.
73
Enlargement continuous shoot, A3 wide copy mode image loss (shade delete quantity) adjustment
74
Used to set the OSA trial mode.
78
Used to set the password of the remote operation panel.
27
1
Used to set non-detection of communication error (U7-00) with RIC. (FSS function)
2
Used to set the sender's registration number and the HOST server telephone number. (FSS function)
4
Used to set the initial call and toner order auto send. (FSS function)
5
Used to set the machine tag No. (This function allows the host computer to check the machine tag No.) 
(FSS function)
Communication (RIC/MODEM)
6
Used to set of the manual service call. (FSS function)
7
Used to set of the enable, alert callout. (FSS function)
9
Used to set the paper transport time recording YES/NO threshold value and shading gain adjustment retry 
number. (FSS function)
10
Used to clear the trouble prediction history information. (FSS function)
11
Used to check the serial communication retry number and the scanner gain adjustment retry number 
history. (FSS function)
12
Used to check the high-density, half-tone process control and the automatic registration adjustment error 
history. (FSS Function)
13
Used to check the history of paper transport time between sensors. (FSS function)
14
Used to set the FSS function connection test mode.
30
1
Used to check the operations of the sensors and the detectors in other than the paper feed section and the 
control circuits.
2
Used to check the operations of the sensors and the detectors in the paper feed section and the control 
circuits.
33
1
Used to check the operations of the card reader sensor and the control circuit.
2
Used to delete the ID (IDM) information of Felica card.
Data clear
40
2
Manual paper feed tray paper width sensor adjustment.
Paper feed
7
Used to set the adjustment value of the manual paper feed tray paper width sensor.
Paper feed
Main
Sub
Functions
Section
Page of 127
Display

Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man14) service manuals if exist.