MX-4100N, MX-4101N, MX-5000N, MX-5001N (serv.man131). NOTIFICATION OF REVISED DESCRIPTIONS IN THE INSTALLATION MANUAL FOR MX-FR11U (DSK) - Sharp Copying Equipment Technical Bulletin (repair manual). Page 5

Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man131) Technical Bulletin online

 
 
5) After completion of reading, installation (update) of 
the firmware is prossed. 
 
Firm Update        IcuM 
 Writing Data 
 
 
  *The code name of the firmware which is currently 
installed(updated) is displayed sequentially on the 
right upper corner. 
  *The display may flash at a moment during installing 
(update) procedures. This is a normal operation. 
 
6) Check the result of installation (update) of the 
firmware. By using [UP] key and [DOWN] key. the 
results of installation (update) of all the firmware files.
 
Firm Update        IcuM 
 Result: OK 
 
Firm Update        IcuM 
  Result: Not Update 
 
Firm Update        IcuM 
 Result: NG 
 
 
  ・OK:Update is successfully completed. 
  ・NG:Update is failed. 
  ・Not Update:Update itself is not executed 
    Reason why update is not executed is no option   
    device for the target firmware is not installed 
 
7) Turn OFF the power to terminate the boot mode. 
8) Turn ON the power, and enter the DSK product key. 
Then turn OFF/ON the power to boot the machine 
as a DSK-installed machine. 
 
 
 
 
G. Specifying settings of data security function. 
 
 
1) If files have been saved by the document filing 
function (including automatic temporary storage 
function) before installing the data security kit, be sure 
to execute [Delete all areas] after installing the kit. 
2) Return the storage data of backup operation to 
the memory on the unit (including HDD). 
3) With cooperation from a machine administrator of the 
installation site for entry of administrator password and 
setting, enter a product key and specify initial setting, in 
accordance with the provided operating manual and 
Precautions (
“Precautions” for MX-FR11 only). 
 
 
H. Affix the provided “Common criteria” certificate 
label onto the front of the main unit. (MX-FR11 only) 
 
Affix 
“Common criteria” certificate label onto the location 
shown in the figure below, on the front of main unit. 
 
 
 
4/4
 
Common Criteria 
Validated 
MFP Data Security Kit 
Page of 5
Display

Download Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man131) Technical Bulletin