Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man13) Service Manual online
MX-4101N ADJUSTMENTS 5 – 2
ADJ 20
Copy color balance/density adjustment
20A
(1)
CCD gamma adjustment (CCD calibration) (Normal document copy
mode)
mode)
63-3 (63-5)
20A
(2)
CCD gamma adjustment (CCD calibration) (DSPF mode)
63-3 (63-5)
20A
(3)
Shading adjustment (DSPF mode)
20B
Copy color balance adjustment (Auto adjustment)
46-24
20C
Copy color balance adjustment (Manual adjustment)
46-21
20D
Copy density adjustment (Each color copy mode) (Whole adjustment)
(Normally unnecessary to adjust)
(Normally unnecessary to adjust)
46-1
20E
Copy density adjustment (Each monochrome copy mode) (Whole
adjustment) (Normally unnecessary to adjust)
adjustment) (Normally unnecessary to adjust)
46-2
20F
Copy color balance adjustment (Color balance adjustment at each density
level in each color copy mode) (Normally not required)
level in each color copy mode) (Normally not required)
46-10
20G
Monochrome copy density/gamma adjustment (Each monochrome copy
mode) (Normally not required)
mode) (Normally not required)
46-16
20H
Condition setting of document density reading operation (exposure) in the
monochrome auto copy mode (Normally not required)
monochrome auto copy mode (Normally not required)
46-19
20I
Document background density reproducibility adjustment in the
monochrome auto copy mode (Normally unnecessary to adjust)
monochrome auto copy mode (Normally unnecessary to adjust)
46-32
20J
Copy density adjustment for low density section (Each copy mode)
(Normally unnecessary to adjust)
(Normally unnecessary to adjust)
46-63
20K
Color copy text, line image edge gamma, density adjustment/Text
⋅Map
mode gamma, density adjustment
46-27
20L
Color document reproducibility adjustment in the monochrome copy mode
(Normally unnecessary to adjust)
(Normally unnecessary to adjust)
46-37
20M
Black ingredient amount adjustment in color copy mode (Normally
unnecessary to adjust)
unnecessary to adjust)
46-38
20N
Sharpness adjustment in the color auto copy mode (Normally
unnecessary to adjust)
unnecessary to adjust)
46-60
20O
Copy high density part density correction setting (Prevents against tone
gap) (Normally unnecessary to adjust)
gap) (Normally unnecessary to adjust)
46-23
20P
Copy color balance adjustment (single color copy mode) (Normally not
required)
required)
46-25
20Q
Copy density adjustment in the RSPF mode (Normally unnecessary to
adjust)
adjust)
46-9
20R
DSPF mode copy density adjustment (Normally not necessary to adjust)
20S
Auto color balance adjustment by the user (Copy color balance auto
adjustment ENABLE setting and adjustment)
adjustment ENABLE setting and adjustment)
26-53
20T
Copy color balance adjustment (Automatic adjustment for each dither)
46-54
ADJ 21
Printer color balance/density adjustment
21A
Printer color balance adjustment (Auto adjustment)
67-24
21B
Printer color balance adjustment (Manual adjustment)
67-25
21C
Printer density adjustment (low density part density adjustment) (Normally
unnecessary to adjust)
unnecessary to adjust)
67-36
21D
Printer high density part desnsity correction setting (high density part tone
gap countermeasure) (Normally unnecessary to the setting change)
gap countermeasure) (Normally unnecessary to the setting change)
67-34
21E
Auto color balance adjustment by the user (Printer color balance auto
adjustment ENABLE setting and adjustment)
adjustment ENABLE setting and adjustment)
26-54
21F
Copy/Printer color balance and density adjustment (Automatic
adjustment)
adjustment)
46-74
21G
Printer color balance adjustment (Automatic adjustment for each dither)
67-54
ADJ 22
Fusing paper guide position adjustment
ADJ 23
Document size sensor adjustment
23A
Document size sensor detection point adjustment
41-2
23B
Adjust the sensitivity of the original size sensor
41-2
ADJ 24
Manual paper feed tray paper size (width) sensor adjustment
40-2
ADJ 25
RSPF/DSPF tray paper size (width) sensor
adjustment
adjustment
25A
RSPF tray paper size (width) sensor adjustment
53-6
25B
DSPF tray paper size (width) sensor adjustment
53-6
ADJ 26
Touch panel coordinate setting
65-1
ADJ 27
Image loss, void area, image off-center,
image magnification ratio auto adjustment
with SIM50-28
image magnification ratio auto adjustment
with SIM50-28
27A
Print image main scanning direction image magnification ratio automatic
adjustment
adjustment
50-28
27B
Image off-center automatic adjustment
50-28
27C
Copy lead edge image reference position adjustment, image off-center,
sub scanning direction image magnification ratio automatic adjustment
sub scanning direction image magnification ratio automatic adjustment
50-28
27D
RSPF mode image off-center, image lead edge position, sub scanning
direction image magnification ratio automatic adjustment
direction image magnification ratio automatic adjustment
50-28
27E
DSPF mode image off-center, image lead edge position, sub scanning
direction image magnification ratio auto adjustment
direction image magnification ratio auto adjustment
50-28
Job No
Adjustment item list
Simulation
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man13) service manuals if exist.