MX-3500N, MX-3501N, MX-4500N, MX-4501N (serv.man15). Copy Guide (Supplied as pdf file on m c's Hard Disk Drive). - Sharp Copying Equipment User Guide / Operation Manual. Page 7

This shows the size of paper loaded in each tray.
In the bypass tray area, the paper type appears above 
the paper size.
The selected tray is highlighted.
The approximate amount of paper in each tray is 
indicated by 

. To display the paper tray selection 

screen for a tray, touch the tray.

This shows the number of copies set.

Touch this to make 2-sided copies.

☞

 (page 15)

Touch this to select an output function such as sort, 
group, offset, staple sort, saddle stitch, or punch.

☞

 (page 42)

These 3 keys can be changed to show any 3 settings or 
functions that you like. The keys are changed in 
"Customize Key Setting" in the system settings 
(administrator). Normally the following keys appear:

☞

• [Special Modes] key

This is the same [Special Modes] key that appears 
when the [Job Detail Settings] key is touched.

☞

 (page 54)

• [File] key, [Quick File] key

Touch either key to use the Quick File or File of the  
document filing functions. These are the same [File] 
and [Quick File] keys that appear when the [Special 
Modes] key is touched. For information on the 
document filing function, see the Document Filing 
Guide.

When the [Job Detail Settings] key is touched, keys for selecting the original size and paper settings appear. The 
[Special Modes] key also appears to allow the selection of special modes. To close the job detail settings screen and 
return to the base screen, touch the [Job Detail Settings] key once again.

Touch this key to select the original size setting.

☞

 (page 33)

Touch this key to change the paper (tray) that is used. 
When the key is touched, each tray and the size and type of 
paper in that tray will appear . Touch the key of the paper 
tray that you wish to use and then touch the [OK] key.
The paper size and paper type settings for trays 1 to 5 
are configured in the system settings.

☞

System Settings Guide "Paper Tray Settings"

For information on the paper size and paper type settings 
for the bypass tray, see the "

Touch this key to select special modes such as Margin 
Shift, Edge Erase, and Dual Page Copy.

☞

 (page 54)

When the system settings screen is displayed, the base screen of copy mode will not appear even if the [COPY] key is 
pressed.

2-Sided Copy

Output

Special Modes

File

Quick File

Full Colour

Colour Mode

Auto

Exposure

100%

Copy Ratio

Auto

Original

Auto     A4

 

Paper Select

Special Modes

Job Detail

Settings

Plain

A4

A4

A4

Plain

Paper Select

OK

OK

Plain

Plain

Plain

Plain

Plain

A4

A4

A4R

B4

A3