Read Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man11) Service Manual online
MX3500N AR-PN1A/B/C/D 8 – 4
11) Connect the punch unit harness to the finisher PWB.
Remove the clamp which is fixing the harness. Wire the har-
ness A (Purple) (package part No. 1) and the harness B
(Orange) (package part No. 2) as shown in the figure, and fix
them with the clamp.
ness A (Purple) (package part No. 1) and the harness B
(Orange) (package part No. 2) as shown in the figure, and fix
them with the clamp.
12) Open the top door, and install the right cabinet upper and fix it
with the screws.
13) Pass the interface harnesses (2 pcs.) through the rear cabinet
upper. While opening the upper door, install the rear cabinet
upper, and fix it with screws.
upper, and fix it with screws.
14) Install the front cabinet upper and fix it with the screws.
* Install the front cabinet upper so that the projection of the
latch arm is in the hole in the lock release lever.
15) Install the knob and close the front cover.
16) Install the saddle finisher to the main unit.
Harness A (Purple)
Harness B (Orange)
Clamp
CN14 on the PWB connected
Harness A (Purple)
Harness B (Orange)
Clamp
CN12 on the PWB connected
Upper cover
Fixing screw
Fixing screw
1
2
Click on the first or last page to see other MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man11) service manuals if exist.