Read Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man109) Technical Bulletin online
MX-RPX1 ADJUSTMENTS 8 – 4
3
E
Is there a
resistance in the
section B?
Yes
No
Increase the
clearance in
the section F
until there is a
resistance in
the section B.
However, the
max. is 5.5mm.
clearance in
the section F
until there is a
resistance in
the section B.
However, the
max. is 5.5mm.
F
F
20mm
a
4.9
-
5.5mm
c) Adjust the section F.
*
If not, turn the section E to adjust.
Use a clearance gauge to check to confirm that the clearance
in the section F is 4.9mm - 5.5mm.
in the section F is 4.9mm - 5.5mm.
Turn section E clockwise to lift the RSPF unit. Turn it
counterclockwise to move down the RSPF unit.
counterclockwise to move down the RSPF unit.
* Insert a clearance gauge in the range of 20mm from the
edge (a) of the right lower cover of the base.
Adjust the
section F so that
the clearance is
4.9mm - 5.5mm.
a
: Aug. 20 2007
3
Click on the first or last page to see other MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man109) service manuals if exist.