Read Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man101) Technical Bulletin online
1-2.Data Stored in HDD
*1: You cannot back up "e-instruction manual", but you can reinstall it.
(Execute Sim49-3 to reinstall "e-instruction manual" from USB memory on the HDD.)
1-3.Procedure for Replacing the HDD
a) The following describes the procedure for replacing the old HDD when the data stored in
the HDD cannot be backed up.
When using the blank HDD (service part)
When using the used HDD (used by the same
model)*
model)*
(1) Install the HDD on the copier/printer
machine and then power on the machine.
Automatic format starts.
Automatic format starts.
(1) Install the HDD on the machine and then
power on the machine.
(2) Trouble code "U2-05" appears. Release
this code by using Sim16.
(2) Trouble code "U2-05" appears. Release
this code by using Sim16.
(3) The blank HDD need not be formatted by
using Sim because it is automatically
formatted.
formatted.
(3) Initialize the data stored in the HDD by using
Sim62-1.
Initialize the instruction manual storage area
by using Sim62-13.
(4) Execute Sim66-10 to clear FAX image memory.
Clear FAX image memory to coordinate HDD data with image-related memory, thereby preventing a
malfunction.
(Besides the FAX model, models that use a scanner and IFAX also need memory clear.)
(5) Reinstall e-instruction manual data.
Install instruction manual data on the HDD by using Sim49-3. (Use USB memory. The details are
given later.)
This is the end of HDD replacement. At this point, the HDD status is the same as the factory
default setting.
* When the used HDD is replaced, the HDD used by other models is automatically formatted
after the copier/printer machine is started.
However, the HDD used by MX-2300 Series, MX-2700 Series, MX-3500 Series, MX-4500
Series, MX-5500 Series, MX-620* Series, or MX-700* Series is not automatically formatted.
b) The following describes the procedure for replacing the old HDD when the data stored in
the HDD can be backed up.
HDD when the data stored in the HDD can be backed up. When using the used HDD (used by the same model)*
(1) Back up the data stored in the old HDD. (Support by serviceman)
(1) Back up the data stored in the old HDD. (Support by serviceman)
Back up the following data to USB memory by using Sim56-2 or to your PC via device cloning:
Data that can be backed up: Address book, image send registration data, and user authentication
(2) Back up the data stored in the old HDD. (Support by user or serviceman)
Back up the following data to your PC via operation on a Web page:
Data that can be backed up: Document filing data, JOB LOG, input profile (printer)
This is the end of data backup.
(3) Install the HDD on the copier/printer machine and
then turn on the machine.
Automatic format
starts.
(3) Install the HDD on the copier/printer machine and
then turn on the machine.
(4) Trouble code "U2-05" appears. Release this code
by using
Sim16.
(4) Trouble code "U2-05" appears.
Release this code
by using Sim16.
(5) The blank HDD need not be formatted by using
Sim because it is automatically formatted.
(5) Initialize the data stored in the HDD by using Sim62-1.
Initialize the instruction manual storage area by
using Sim62-13.
(6) Execute Sim66-10 to clear FAX image memory.Clear FAX image memory to coordinate HDD data with image-
related memory, thereby preventing a malfunction.(Besides the FAX model, models that use a scanner and
IFAX also need memory clear.)
(7) Reinstall e-instruction manual data.Install instruction manual data on the HDD by using Sim49-3.
(Use USB memory. The details are given later.)
(8) Import data from USB memory.
Import data by using Sim56-2 (For data backup to your PC via device cloning, import data from a Web page.)
Data that can be imported: Address book, image send registration data, user authentication
(9) Import data from your PC via operation on a Web page.
Data that can be imported: Document filing data, input profile (printer), output profile (printer), user font, user
macro
(JOB LOG can be backed up but cannot be imported.)
Sharp Electronics (UK) Ltd., Technical Services Group
CCE301R
Click on the first or last page to see other MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man101) service manuals if exist.