Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man9) Service Manual online
MX-4070N MX-PN15B/C/D (PUNCH MODULE) 12 – 9
38) Pass the harness through the wire saddle.
39) Tie the harness, and pass it through the wire saddle so that it can
be fixed tightly.
40) Install the rear cabinet of the finisher with the screw.
41) Insert the hopper from the front side of the finisher, and push the
hopper as far as it goes.
42) Cut the cover section of the finisher shown in the figure below with
the nipper.
43) For MX-FN29 (Saddle finisher), connect the interface connector
connected to the inner cover.
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man9) service manuals if exist.