Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man35) User Guide / Operation Manual online
45
Fax Problems
BROADCAST TRANSMISSION DOES NOT WORK
Check
Solution
Has broadcast setting been disabled
in the setting mode (administrator)?
in the setting mode (administrator)?
■ Broadcast transmission cannot be performed when "Setting mode
(administrator)" - [System Settings] → [Image Send Settings] → [Fax Settings]
→ [Send Setting] → [Disable Fax Broadcasting] is disabled.
→ [Send Setting] → [Disable Fax Broadcasting] is disabled.
THE FAX RECEPTION / DATA INDICATOR DOES
NOT TURN OFF
Check
Solution
Did you retrieve a received fax that
was printed?
was printed?
■ The fax reception / data indicator blinks until received faxes are retrieved.
Is an error preventing received faxes
from being printed?
from being printed?
■ The fax received / data indicator blinks when a received fax remains in memory
without being printed. Clear the error that is preventing printing.
I DON'T KNOW HOW TO CHECK AN ADDRESS
WHEN SENDING A FAX
Check
Solution
Tap the [Address Review] key.
■ Tap the [Address Review] key to view a list of the addresses.
Is "Fax Dest. Confirmation Mode"
enabled in setting mode?
enabled in setting mode?
■ Enable "Setting mode (administrator)" - [System Settings] → [Image Send
Settings] → [Fax Settings] → [Default Settings] → [Fax Dest. Confirmation Mode].
When this setting is enabled, an address confirmation message will appear when
you send a fax to prevent erroneous transmission.
When this setting is enabled, an address confirmation message will appear when
you send a fax to prevent erroneous transmission.
?
!
?
!
?
!
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man35) service manuals if exist.