Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man30) User Guide / Operation Manual online
1-9
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
DATA NOTIFICATION INDICATOR AND ERROR INDICATOR
The data notification indicator and the error indicator lights solidly or blinks to indicate the status of the machine.
Error indicator (red)
Data notification indicator (green)
Pattern 1
Pattern 2
Pattern 3
Solidly
Errors that do not stop machine
operation, such as almost out of toner.
operation, such as almost out of toner.
Job in progress,
such as paper
feeding or output.
such as paper
feeding or output.
Ready state or other
state where jobs can
be accepted.
state where jobs can
be accepted.
An original has been
placed in the
document feeder
placed in the
document feeder
Blinks
Errors that stop machine operation,
such as misfeeds and out of toner.
such as misfeeds and out of toner.
A fax is being received
When the job separator (upper tray) or exit tray unit (right tray) is used for
output, this blinks until the output is removed.
When the job separator (upper tray) or exit tray unit (right tray) is used for
output, this blinks until the output is removed.
To set the status indicated by the data notification indicator
In "Setting mode (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Status Indicator
Setting].
In "Setting mode (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Status Indicator
Setting].
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man30) service manuals if exist.