Read Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man184) Technical Bulletin online
3/4
No. Item
Details
20 Image
Send
While reconnecting to the server with support for passive mode after failing to the
connection in active mode, the communication was not allowed for a while depends on the
server. In that case, the data transmission to FTP site was not allowed until the recovery. A
Soft SW has been added as a countermeasure so that the connection in passive mode is
allowed in the first place.
FAX soft SW (in Sim66-1)
SW No. 96 Bit No. 4
0: Connection in active mode (default)
1: Connection in passive mode
connection in active mode, the communication was not allowed for a while depends on the
server. In that case, the data transmission to FTP site was not allowed until the recovery. A
Soft SW has been added as a countermeasure so that the connection in passive mode is
allowed in the first place.
FAX soft SW (in Sim66-1)
SW No. 96 Bit No. 4
0: Connection in active mode (default)
1: Connection in passive mode
21 Image
Send
Modification of failure to transmit the data in proper size. The data transmitted were slightly
smaller than actual size if Inch size paper was scanned.
smaller than actual size if Inch size paper was scanned.
22 Printer
Modification of failure to print out the PS data in case [Network Settings] -> [Print Port
Settings] -> [Use Banner] on LPD tag on web page was enabled.
Settings] -> [Use Banner] on LPD tag on web page was enabled.
23 Printer
Modification of the problems with output of the PS data such as taking too long to print out
large volume data and disappearance of spooled data.
large volume data and disappearance of spooled data.
24
Printer
Modification of machine lockup while printing PS data with many pages
25
Printer
Modification of an error printing particular file from Mac OS
26 Printer
Modification of a failure to print custom size data in duplex in case the data were output in
Document Filing.
Document Filing.
27
Printer
Modification of garbled characters while printing particular PDF file.
28 Printer
Modification of machine lockup. If particular Corel Draw 11 file was printed via PCL 6
driver, the machine locked up and was unable to print.
driver, the machine locked up and was unable to print.
29 Printer
Modification of print in solid black around logo mark in case the data were printed from the
system called AddVantage.
system called AddVantage.
30 Printer
Modification of output of improper number of copies in case "Separator page
(sysprint.sep)" is set.
(sysprint.sep)" is set.
31 Printer
Modification
of
the
failure to print out from SAP
32
Network
communication
communication
Modification of a failure to open tiff file with Photo viewer for Windows 7. The problem
occurred if the file was stored to NAS for main unit using "Settings for HDD Storing of
Received Data" feature etc.
occurred if the file was stored to NAS for main unit using "Settings for HDD Storing of
Received Data" feature etc.
33
Network
communication
communication
Modified to perform a security check input limit item type the following security key every.
When type = WPA security
- Can be registered as a string: 5 digits / 13 digits
- Can be registered only Hex: 10 digits / 26 digits
- No registration other than the above
When type = WPA security
- Can be registered as a string: 8-digit to 63-digit
- Can be registered only Hex: 64 digits
- No other registration
When type = WPA security
- Can be registered as a string: 5 digits / 13 digits
- Can be registered only Hex: 10 digits / 26 digits
- No registration other than the above
When type = WPA security
- Can be registered as a string: 8-digit to 63-digit
- Can be registered only Hex: 64 digits
- No other registration
34 OSA
Modification of an "out of memory" error. An error message "The memory becomes full."
was displayed when mySharp was displayed in OSA mode.
was displayed when mySharp was displayed in OSA mode.
35 Option
Change of default URL in Web Browse from "http://www.sharp-world.com/" to
"about:blank" (blank page)
"about:blank" (blank page)
36 Others
Modification of erasure of Address Book data. It occurred during the auto recovery process
of HDD (remounting procedures after "WatchDogError"). As a countermeasure, the
machine stops for E7-03(09) error instead of the remounting for auto recovery.
of HDD (remounting procedures after "WatchDogError"). As a countermeasure, the
machine stops for E7-03(09) error instead of the remounting for auto recovery.
Click on the first or last page to see other MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man184) service manuals if exist.