Read Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man184) Technical Bulletin online
2/4
[Description]
No. Item
Details
1 Specification
Implementation of the support for AirPrint which is provided by Apple Inc. to enable
wireless print with iOS terminals such as iPhone/iPad.
wireless print with iOS terminals such as iPhone/iPad.
2 Specification
Implementation of support for cloud portal
3 Specification
Modification of F6-00. The symptoms listed below appeared after switch on a machine or
while recovering from 1W power-save mode:
- Fax job is prohibited, even though other jobs are allowed.
- F6-00 error is displayed on any screen other than Home screen.
- Display of F6-00 error is cleared by pressing OK key, but it is displayed again at the
timing of auto-clear.
while recovering from 1W power-save mode:
- Fax job is prohibited, even though other jobs are allowed.
- F6-00 error is displayed on any screen other than Home screen.
- Display of F6-00 error is cleared by pressing OK key, but it is displayed again at the
timing of auto-clear.
4 Specification
Modification of machine lockup which occurred at the time of startup displaying "Please
wait."
wait."
5 Specification
Modification of U2-42 error. The error occurred due to the limitation of the number of file
allowed to open at the same time for Scan to SMB etc.
allowed to open at the same time for Scan to SMB etc.
6 Specification
Modification of failure to perform Scan to SMB etc. with an error message "Job queue
memory is full."
memory is full."
7 Specification
Change of the time-out timer for read / write HDD from 10 seconds (with 3 retries) to 22
seconds (with 2 retries).
seconds (with 2 retries).
8 Specification
Implementation of modification for E7-03 which occurred if PIO command (standby
command) failed even once.
command) failed even once.
9 Specification
Modification of failure to activate card reader by Equitrac with the machine with built-in
keyboard
keyboard
10 UI
Modification of failure to display Preview. The problem occurred after machine kept
working for 25 days without turning off (or 1W power-save mode).
working for 25 days without turning off (or 1W power-save mode).
11 UI
Modification of lock up with the message "Please wait" at the time of log-in to MFP. The
problem occurred when the MFP was set to Device account mode and Document Filing
was set as default screen.
problem occurred when the MFP was set to Device account mode and Document Filing
was set as default screen.
12
UI
Modification of failure to delete Document Filing data in a batch
13
Web Page
Modification of the error during the connection test in LDAP Settings on web page
14 Image
Send
When Forward Received Fax Data setting was enabled, transfer processing (job deletion
processing after the transfer) did not complete properly that this job was recognized
incomplete. As a result, some problems occurred that for example, receiving lamp stayed
ON. This problem has been corrected.
processing after the transfer) did not complete properly that this job was recognized
incomplete. As a result, some problems occurred that for example, receiving lamp stayed
ON. This problem has been corrected.
15 Image
Send
Modification of machine lockup which occurred after reboot in case the power delivery
discontinued while receiving Fax data using more than one line
discontinued while receiving Fax data using more than one line
16 Image
Send
If multiple Fax lines were terminated at the same time due to an error while each line was
being used to perform Fax data communication, the communication of only one line was
not completed (even thought the line became inactive). This problem has been corrected.
being used to perform Fax data communication, the communication of only one line was
not completed (even thought the line became inactive). This problem has been corrected.
17
Image Send
Modification of machine lock up while receiving and printing Fax data
18 Image
Send
Modification of following problems due to the inclusion of "data transfer using OSA" as one
of the judgement condition for job deletion (data deletion). As a result, jobs were deleted
during the operation/processing of data transfer in OSA.
- Jobs were deleted after the data transfer that unable to print.
- Available memory never went back to 100% but remained 99% (because the job deletion
was performed under improper condition that garbage data remained*).
*In this case image memory clear in Sim 66-1 is required.
of the judgement condition for job deletion (data deletion). As a result, jobs were deleted
during the operation/processing of data transfer in OSA.
- Jobs were deleted after the data transfer that unable to print.
- Available memory never went back to 100% but remained 99% (because the job deletion
was performed under improper condition that garbage data remained*).
*In this case image memory clear in Sim 66-1 is required.
19
Image Send
Modification of failure to output received Internet Fax data from particular models
Click on the first or last page to see other MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man184) service manuals if exist.