MX-2640N, MX-2640NR, MX-2640FN, MX-3140N, MX-3140NR, MX-3140FN, MX-3640N, MX-3640NR, MX-3640FN (serv.man180). Combined MFP Firmware Version ICUM BOOT MAIN 02.10.A2 ICUM MAIN 02.10.A2- Production Run Sept 2013 Fix for E7-03 No output tray allowed - Bulletin Only - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

Read Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man180) Technical Bulletin online

 
 
 
2/2 
[Description] 
No. Item 
Details 
1 Image 
Send 
Modification of the problem with Fax data reception. The problem occurred due to the 
problem with the processing of internal timer control section for ICU. 
Network 
communication 
Modification of the incorrect display of error message "Paper Empty". 
This message was displayed when the paper tray not being used for this job was empty 
while performing a job in AirPrint. 
3 Specification 
Modification of E7-03(34) error 
This error occurred when MFP failed to retrieve the information on HDD trying to 
recognize it during the startup. 
As a countermeasure, SATA is reset to reinitialize (for retry processing) in case the MFP 
failed to retrieve the data which HDD configures. 
4 Specification 
5 Specification 
Modification of occasional failure to output data due to the display of an error message 
"No output tray is allowed.". 
6 Specification 
Modification of the failure to synchronize the time between e-mail and server during 
daylight saving time. 
 
 
Page of 2
Display

Download Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man180) Technical Bulletin