Read Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man177) Technical Bulletin online
Work procedure:
1. Insert Poly sliders (x2) into the boss of BK drive frame As.
2. Install BK drive frame As.
*Securely fit the pawl and boss of BK drive frame As into the main drive frame.
*When conducting the work for inserting Poly slider, please make sure the insertion location and QTY are correct.
*Please make sure that the sintered bearing is inserted into the drive farme.
*When conducting this work, please be careful not the harness of the clutch to be caught.
* Belt tooth side must not be damaged.
2. Install BK drive frame As.
*Securely fit the pawl and boss of BK drive frame As into the main drive frame.
*When conducting the work for inserting Poly slider, please make sure the insertion location and QTY are correct.
*Please make sure that the sintered bearing is inserted into the drive farme.
*When conducting this work, please be careful not the harness of the clutch to be caught.
* Belt tooth side must not be damaged.
There should not be any clearance
between BK drive frame and Main drive frame.
(Both parts should completely be fit in each other.)
between BK drive frame and Main drive frame.
(Both parts should completely be fit in each other.)
Harness of the clutch
must not be caught.
must not be caught.
Make sure that the pawl and positioning boss
of resin frame are securely fit in.
of resin frame are securely fit in.
Make sure that the belt is set to Pulley 22P.
NOTE:
There are two Poly sliders.
There are two Poly sliders.
3/6
Click on the first or last page to see other MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man177) service manuals if exist.