Read Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man170) Technical Bulletin online
2/3
Detail of WEB path change
Narrow down the pulling angle from the nip by changing the path of WEB against the WEB tension
axis.
This change will enable to improve the resistant to the noise (vibration noise) which is ascribable to
the WEB contamination.
[Work
Procedure]
1)
Before
change
2)
After
change
3)
Before change
After change
Lower side of tension axis
Upper side of tension axis
*Remove the screw x 2, and take
off the holder.
*Remove the tension axis, and then
insert it to the underside of WEB.
*Install the holder.
Check that the tension axis is
placed on the underside of WEB.
*After installing the WEB unit,
be sure to rotate the lever to
make no slack on the WEB.
Tension axis
Click on the first or last page to see other MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man170) service manuals if exist.