Read Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man150) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
2/3
[Description]
No.
Item
Details
1
Main unit control
Modification of the problem that E7-03, U2-50/60 trouble may occur at the time of startup
and recovering from Power Save Mode.
and recovering from Power Save Mode.
2
Main unit control
When obtaining the start-up image (Snapshot) at the time of firmware update, a part of
the required data cannot be retrieved and the machine may not be able to work correctly.
the required data cannot be retrieved and the machine may not be able to work correctly.
3
Main unit control
Modification of the problem that the module controlling the real time clock (RTC) in ICU
cannot start up correctly, which leads to the phenomena that the machine does not enter
Ready state or locks up etc.
cannot start up correctly, which leads to the phenomena that the machine does not enter
Ready state or locks up etc.
4
Main unit control
Modification of the problems that FAX receiving may stop after reaching to the preset
limit or the job may disappear when printing because the internal processing at the time
of job completion cannot work correctly.
limit or the job may disappear when printing because the internal processing at the time
of job completion cannot work correctly.
5
Main unit control
Modification of an occasional failure to update the information on Tray Settings
6
Main unit control
Modification of the problem that CN update mode is displayed when turning on the main
switch and the machine may be unable to start up correctly.
7
Main unit control
Modification of the problem that the scan job internally remains when enabling Eco Scan
Setting and then perform the cancel operation after copy preview.
Setting and then perform the cancel operation after copy preview.
8
Main unit control
When making Group Registration in Address Book, the address registered to Group is
occasionally removed from Group. This problem has been corrected.
occasionally removed from Group. This problem has been corrected.
9
Main unit control
Modification of the problem that L8-20 trouble may occur in the environment that is
printing from PC with USB connected.
printing from PC with USB connected.
10 OSA
Modification of the problem that the error occurs when starting up FAX OSA application
after recovering from Energy Save.
after recovering from Energy Save.
11
OSA
Modification of the problem that “Automatically print stored jobs after login” feature set
up by User Control does not function when using OSA external authentication.
12 OSA
Modification of the problem that the notification of FAX event differs between OSA4.5 and
OSA4.1.
OSA4.1.
13 OSA
Modification of a defect in OSA external authentication: When a copy job is stopped for
reaching to the limit, the job restarts once the information is checked.
reaching to the limit, the job restarts once the information is checked.
14 UI
Modification of the problem that the set item
of “B/W 600dpi x 600dpi Scanning Mode for
Document Feeder” is not displayed.
15 UI
Modification of the problem that the applicable job remains in Job Status after USB
Direct Print and it cannot even be deleted.
16 UI
Modification of the problem that a part of the screen may not be displayed when
recovering from Energy Save.
recovering from Energy Save.
17 Copy
Modification of PPD2_PRI jam:
The paper jam occurs during a Copy job when original size is directly entered by setting
larger size in X direction and smaller size in Y direction and "Repeat Layout" is set using
large size paper such as A3/B4 size paper (ex. 400×30 on A3 size paper)
The paper jam occurs during a Copy job when original size is directly entered by setting
larger size in X direction and smaller size in Y direction and "Repeat Layout" is set using
large size paper such as A3/B4 size paper (ex. 400×30 on A3 size paper)
18 Image Send
Modification of a problem with cancelling Fax data transmission:
If a multiple-page Fax transmission job without ECM is cancelled while transmitting any
page other than last page, the cancellation is not processed properly that following Fax
and Scanner job does not start.
If a multiple-page Fax transmission job without ECM is cancelled while transmitting any
page other than last page, the cancellation is not processed properly that following Fax
and Scanner job does not start.
19 Image Send
Modification of the problem that Sender cannot be OFF even though it is OFF on
PC-FAX driver.
PC-FAX driver.
20 Image Send
Modification of the problems that other information than the registered information is also
printed on Network Inbound Routing List and it takes some time to print out the list.
printed on Network Inbound Routing List and it takes some time to print out the list.
21 Printer
Modification of occasional garbled characters or failure to complete the job (The MFP
keeps displaying "Printing in progress.").
This problem occurs in case PS printing is performed via USB connection.
keeps displaying "Printing in progress.").
This problem occurs in case PS printing is performed via USB connection.
22 Printer
Modification of the problem that the print result may be missing when printing with
Custom Size Envelope.
Custom Size Envelope.
23 Printer
Modification of the problems that the machine may lock up / the print failure may occur
when printing the certain PS file.
when printing the certain PS file.
24 Printer
Modification of the problem that the gradation with the light grey occasionally cannot
smoothly be printed when printing from InDesign in MacOS10.6.8 environment.
smoothly be printed when printing from InDesign in MacOS10.6.8 environment.
Click on the first or last page to see other MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man150) service manuals if exist.