MX-2640N, MX-2640NR, MX-2640FN, MX-3140N, MX-3140NR, MX-3140FN, MX-3640N, MX-3640NR, MX-3640FN (serv.man128). CCE 1385 CHANGE OF LENS UNIT ETC. ASSOCIATED WITH CHANGE OF CCD ELEMENT - Sharp Copying Equipment Technical Bulletin (repair manual). Page 3

Read Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man128) Technical Bulletin online

 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
3/3 
 
*1 Compatibility between scanner control   
      PWB and optical unit 
Optical unit 
Before change 
DUNT-8956DSZZ 
DUNT-8956DS11 
After change 
DUNT-8956DS15 
DUNT-8956DS16 
Scanner control PWB 
Before change 
CPWBX2072DS52 
OK 
NG 
After change 
CPWBX2072DS59 
NG 
OK 
 
 
1. When replacing either of the lens unit, lamp unit (LED driver PWB) or scanner control PWB from   
 
      the old parts to the new parts, all of the lens unit, lamp unit (LED driver PWB) and scanner   
 
      control PWB need to be replaced to the new parts. 
 
      Firmware version also needs to be updated to ICUM:0400A20a, SCU:0200A200 or later. 
 
2. When replacing either the lens unit, lamp unit (LED driver PWB) or scanner control PWB from   
 
      the new parts to the old parts, all of the lens unit, lamp unit (LED driver PWB) and scanner   
 
      control PWB need to be replaced to the old parts.    However, it does not matter whether the   
 
      firmware is old or new version. 
 
 
Note1) Action items when replacing the old lens unit with the new lens unit; 
 
              1. Update the firmware of scanner control PWB to the new version (Ver0200A200). 
 
              2. Update the firmware of MFPC PWB to the new version (Ver0200A200). 
 
              3. When MX-EB11 is installed, update the MX-EB11 firmware to the new version   
 
 
(Ver0200A200). 
 
 
Note2) Action items when replacing the old lens unit with the new lens unit or replacing the new   
 
              lens with the old lens; 
 
              Target used for the auto adjustment of color balance is automatically switched due to the   
 
              replacement of the scanner (old->new/new->old) but the service target is not automatically   
 
              switched. 
 
              When the auto adjustment is carried out at the time of serving or it is done by the user, the   
 
              following procedure is required not to use the old target: 
 
 
 
1. Enter SIM63-8. 
 
 
2. Press EXECUTE. 
 
 
3. Press YES. 
 
 
4. Get out of SIM63-8. 
 
 
5. Enter SIM67-28. 
 
 
6. Press EXECUTE. 
 
 
7. Press YES. 
 
 
8. Get out of SIM67-28. 
 
Page of 3
Display

Download Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man128) Technical Bulletin