MX-2640N, MX-2640NR, MX-2640FN, MX-3140N, MX-3140NR, MX-3140FN, MX-3640N, MX-3640NR, MX-3640FN (serv.man10). Installation Manual Revised June 2014. - Sharp Copying Equipment Service Manual (repair manual). Page 14

Read Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man10) Service Manual online

MX-3640N  MX-2640N/3140N/3640N (MAIN UNIT)  2 – 4
• There is no developer in the shutter position.
• There is too much developer. 
(The stirring screw cannot be seen.)
Be sure to keep the developing unit level while supplying the
developer.
9) Insert the developing unit so as not to give a strong shock to
the main unit gently.
Slide the developing unit horizontally into the machine, in the
direction  of  the arr ow,  until  developing  unit  locks into.  place.
Do not push the unit diagonally, as contact with the drum may
occur causing damage.
When removing or installing the developing unit, put your hand
from below the unit and slide it in parallel along the guide. 
At that time, be careful not to touch the roller surface.
When  installing  the machine, there   is no need to r emove  or
install the OPC drum unit. If it must be removed or installed for
any  reason, follow the procedures  below. When r emoving or
installing the OPC drum unit, put your hand from below the unit
and slide it in parallel along the guide on the right side. 
At that time, be careful not to touch the OPC drum surface.
10) Close the drum positioning cover, and lock it.
11) Re-install the waste toner box and lock into place.
B. Set the control level for the reference toner 
density
Setting  of  the  reference  toner  density  control  level  must  be  per-
formed with the toner cartridge removed.
If setting is performed with the toner cartridge installed, the EE-EL
error or an overtoner trouble may occur.
1) With  the  front  cabinet open ,  connect the  power  plug to  the
power outlet.
2) Turn ON the main power switch of the machine and the power
switch on the operation panel.
2
1
Page of 126
Display

Click on the first or last page to see other MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man10) service manuals if exist.