Read Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man10) Service Manual online
MX-3640N MX-EB12 N (MIRRORING KIT) 22 – 5
C. Kinds of errors, causes and remedies
Phenomenon 1
An error indicating an abnormality in the Setup.ini file when booting
An error indicating an abnormality in the Setup.ini file when booting
the RIB Buster software.
Phenomenon 2
The mirroring information has not been deleted normally.
The mirroring information has not been deleted normally.
Phenomenon 3
Though the target HDD is connected, it is not displayed.
Though the target HDD is connected, it is not displayed.
Cause
Setup.ini file does not exists, or there is any
abnormality in the file.
Countermeasures Check to confirm that there is Setup.ini file in the
proper directory and that there is no abnormality in
the descriptions.
Cause
Temporary communication trouble, cable or other
device trouble, HDD trouble
Countermeasures 1. Click [Clear RIB in HDD] button again.
2. If the trouble is not solved by procedure 1. ,
disconnect and connect the cable, change the
devices, and reboot the RIB Buster. Then execute
procedure 1. .
Cause
The target HDD is not registered in the Setup.ini file.
Cable or other device trouble, HDD trouble
Countermeasures 1. Reboot RIB Buster. Click the framed section.
2. If the trouble is not solved by procedure 1. ,
replace the Setup. ini file and the RIB Buster
{YYYYMMDD} with the latest version, and execute
procedure 1. .
3. If the trouble is not solved by procedure 2. ,
disconnect and connect the connector, change the
devices, and reboot the RIB Buster. Then execute
procedure 1. .
Click on the first or last page to see other MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man10) service manuals if exist.