Read Sharp MX-2630 (serv.man15) Technical Bulletin online
【Description】
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
MX-2630N
30
Network
Correction of the problem that there are some cases where the
polling of FSS stops and the reception of I-Fax data fails.
○
○
○
○
○
31
Network
Unsupport of Mopria
N/A
N/A
N/A
N/A
○
32
Copy
Correction of the failure to make hole punch though the punch
holes can be made when performing “Proof Copy”
○
○
○
○
○
33
Option
Addition of SoftSW to switch Enable/Disable for output of non-
stapled papers in a batch:
Sim55-01 SW3-7
0: "Output papers in a batch" ON (Default)
1: "Output papers in a batch" OFF
○
○
○
○
○
34
Option
Correction of the problem that Invoice-R paper cannot be ejected
as a batch but ejected as a single page.
○
○
○
○
○
35
Option
Correction of the problem that the manual Staple LED is
illuminating even though the manual staple is prohibited while a
job with Stapleless staple is running.
○
○
○
○
○
36
Option
Correction of the problem that the message "Remove the paper"
may not disappear if removing the paper quickly right after the
completion of manual stapling
○
○
○
○
○
37
Option
Correction of the problem that the location of the paper jam is not
displayed if the paper jam is detected at the saddle section when
turning ON the machine
○
○
○
○
○
38
Option
Correction of the following problem:
When the machine runs out of paper while discharging 2-sided,
the paper smaller than A4/Letter in offset mode, the last paper
bounce out the batch, causing alignment failure.
○
○
○
○
○
39
Option
Correction of the finisher error or the paper jam caused due to
the size illegal when switching Paper tray on the main unit
○
○
○
○
○
40
Image send
Correction of the following problem:
MFP locks up while displaying "Sending/ Waiting" if the original
which will be cropped cannot be detected when scanning the
data using the cropping function(Photo/Multi) and "Send
Destination Link" feature
○
○
○
○
○
41
Image send
Countermeasure for poor detection in OCR:
When scanning B/W original with OCR in Auto Color Mode, the
detection level of OCR may get poor. As the countermeasure,
the modification has been made to be able to switch the color
judgement processing with SoftSW
SIM55-3 SW37-8
0: According to B/W Mode setting at Color Auto Select :
("Grayscale” or “Mono2”)
1: "Grayscale" (Default)
○
○
○
○
○
42
Image send
When receiving the data sent with Destination Link (URL)
feature, URL occasionally could not be recognized as the link
depending on the application. As the countermeasure, the
modification has been made to add < > at the head and end of
URL so that it can be recognized.
○
○
○
○
○
○=applied
Click on the first or last page to see other MX-2630 (serv.man15) service manuals if exist.