Read Sharp MX-2630 (serv.man14) Technical Bulletin online
Technical Report
: MX-FR51U/FR52U
No. : CCE-1838
Date: Nov. 27, 2017
この資料に掲載されている表示価格は消税抜きです。
SHARP CORPORATION
Office Solutions Business Unit
C
ROM UPGRADE..... (3)
This version is HCD-PP v1.0 that the applicable CC certification has been given.
Caution for firmware upgrade: Make sure to turn off the main power once. Then turn on the
power and upgrade the firmware.
power and upgrade the firmware.
- If the firmware update procedure is executed while MFP is still operating, the operation
panel becomes black after the firmware upgrade and MFP may not be able to start up in
some rare cases.
panel becomes black after the firmware upgrade and MFP may not be able to start up in
some rare cases.
- If upgrading from the version older than 04.01.Z1.00, 04.01.K1.00 you won’t be able to
restore original version.
restore original version.
- If "Google drive" is used with the version older than 04.01.Z1.00, 04.01.K1.00 it will no
longer be used after firmware upgrade.
longer be used after firmware upgrade.
In that case, go into System Settings > Cloud Connect Settings and enable "Google drive"
for usage.
for usage.
1. Model Name:
MX-FR51U(Option for MX-3050N/3550N/4050N/5050N/6050N, MX-2630N)
MX-FR52U(Option for MX-3060N/3560N/4060N/3070N/3570N/4070N/5070N/6070N)
2. Description:
Upgrade of ICU, ASIC, PCU and SCU-ROM
From mid-November 2017 production
Model
ROM
control
No.
BUNDLE
ICU
ASIC
PCU
SCU
SPF
MX-FR51U
C00
0700Kc00_
17101600
0700K100
0700Zc00
0700Z100
0700Z100
-
MX-FR52U
0700Zc00_
17101600
0700Z100
0700Zc00
0700Z100
0700Z100
0500Z100
Item of change :See the separate page
Note) This report is a T/R for the Data Security Kit Option, corresponding to the general T/R No.
CCE-1836.
CCE-1836.
ROM Version Combination History Table
Model : MX-FR51U
Model : MX-FR51U
No.
ROM
Control
No.
BUNDLE
ICU
ASIC
PCU
SCU
Action
T/R No
(2)
B01
0651Kc00_
17080400
0650K100
0650Zc00
0651Z100
0500Z100
2017/9
Mid
CCE-1800R
(1)
B00
0650Kc00_
17062300
0650K100
0650Zc00
0650Z100
0500Z100
2017/8
CCE-1800R
Model : MX-FR52U
No.
ROM
Control
No.
BUNDLE
ICU
ASIC
PCU
SCU
SPF
Action
T/R No
(2)
B01
0651Zc00 _
17080400
0650Z100
0650Zc00
0651Z100
0500Z100
0500Z100
2017/9
Mid
CCE-1800R
(1)
B00
0650Zc00 _
17062300
0650Z100
0650Zc00
0650Z100
0500Z100
0500Z100
2017/8
CCE-1800R
【Description】
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
MX-2630N
1
Main unit
control
Default value of Soft SW(CCE-1803 No.2) has been changed.
Sim55-1 SW22-1
0:Display
1:Not display(New Default)
*Set value above will not change when updating the firmware in
the field.
○
○
○
○
○
2
Main unit
control
Correction of the problem that the waiting time for a few tens of
seconds is occasionally caused when printing B/W data
○
○
○
○
○
3
Main unit
control
For the countermeasure against black streaks on Main charger,
the exhaust efficiency in Main charger has been improved by
changing the fan control.
○
○
○
○
○
4
Main unit
control
Support of Flash ROM from ISSI and CYPRESS (previously
SPANSION)
○
○
○
○
○
5
Main unit
control
Correction of the problem that the data cannot occasionally be
printed while specifying Tray2 when re-printing Document Filling
on the machine with Stand/500 Sheet Paper Drawer installed.
○
○
○
○
○
6
Main unit
control
Print stops due to "Machine Page Limit Setting" in User Control
regardless of Enable/Disable in User authentication setting.
The correction has been made so that the print does not stop
when User authentication is disabled.
○
○
○
○
○
7
Main unit
control
Correction of the following problem:
When installing the brand new EEPROM, U2 trouble occurs, and
then EEPROM Auto Backup is executed, which makes the
backup in HDD the new information, and in the end, SIM may not
be restored.
○
○
○
○
○
8
Main unit
control
Correction of the problem that the machine with FAX installed
may lock up while "Please wait." is displayed when pressing Start
key.
○
○
○
○
○
9
Main unit
control
Correction of the problem that Updated date & Time of the folder
is indicated not as local time but as UTC when updating the file
in the folder of simple NAS.
○
○
○
○
○
10
Main unit
control
Support for HCD-PP certification
○
○
○
○
○
11
Main unit
control
Short life toner cartridge has been supported for Europe and the
modification has been made to indicate Toner bottle counter in
Sim22-14 separately in each LARGE and SMALL.
○
○
○
○
○
12
Main unit
control
Correction of the problem that the message “Please wait” is
occasionally displayed on Fax mode screen too long after
rebooting the machine when updating the firmware on the
machine with the standard DSK enabled.
○
○
○
○
○
○=applied
【Description】
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
MX-2630N
13
Main unit
control
For the following reason, the processing has been improved so
that FAX output tray set up on the previous version can be
transferred to the new version:
When updating from Version 06.00.Z1.00, 06.00.K1.00 or earlier
version on the machine with the relay unit (MX-RB25) installed,
the FAX output tray may change from the finisher tray to the job
separator upper tray.
○
○
○
○
○
14
Main unit
control
Improvement of F2-40 error
○
○
○
○
○
15
Printer
Correction of the problem that Source Profile(Gamma) setting of
PCL driver may not be reflected on the print
○
○
○
○
○
16
Printer
Correction of the problem that the print may fail when printing
from AS400 using IPDS
○
○
○
○
○
17
Printer
Correction of the problem that the year listed in Excel may be
printed as the value which 4 years will be added when performing
Direct Print of XLSX file created by Excel 2008 for Mac or earlier
version.
○
○
○
○
○
18
Printer
Correction of the problem that some texts in transparent section
may disappear when performing Direct print of PDF file with
Transparent feature contained
○
○
○
○
○
19
Printer
Correction of the problem that print result of the specific Word file
by Direct print may be different from the preview on PC
○
○
○
○
○
20
Printer
Correction of the problem that the print with Port 9100 may not
be available in VPS (Virtual Private Server) environment
○
○
○
○
○
21
Printer
Correction of PS error caused when printing from the certain
application (Create!Forms)
○
○
○
○
○
22
Printer
Correction of the following problem:
When deleting AirPrint job which is suspended due to the paper
empty from the operation panel, the following AirPrint job may
not be printed.
○
○
○
○
○
23
Printer
Correction of the problem that MFP may lock up rendering when
printing a job with Expand setting being enabled
○
○
○
○
○
24
Printer
For the following reason, the processing has been improved:
When printing the data containing a lot of patterns like Fill pattern
of Excel, etc. with PS, it sometimes takes time for the output.
○
○
○
○
○
25
Printer
Correction of the problem that MFP may lock up if E-mail print
setting is enabled.
○
○
○
○
○
26
Printer
Correction of the problem that the secondary unit doesn’t display
job list for Print release if login name of User Authentication
consists of Chinese characters.
○
○
○
○
○
27
Network
Correction of the problem that NIC on the main unit is
disconnected in the high network load environment on rare
occasion.
○
○
○
○
○
28
Network
Correction of the problem that PEAP certification ended up with
an error under client’s IEEE802.1X environment.
○
○
○
○
○
○=applied