Read Sharp MX-2614N / MX-3114N (serv.man8) Service Manual online
MX-3114N MX-EB16 (PRODUCTIVITY KIT) 23 – 4
4. User data restore
When the user data were backed up in the procedure 2, the user
data must be restored.
data must be restored.
When a HDD option is installed to a machine which has been not
used, the procedure is not required.
used, the procedure is not required.
1)
Use SIM56-2 to restore the data which has been backed up in
the procedure 2-1).
the procedure 2-1).
Insert the USB memory into the USB connector in the machine
operation section. Enter the SIM56-2 mode, select
[EEPROM&SD IMPORT] and press [EXECUTE] key and
[YES] key.
operation section. Enter the SIM56-2 mode, select
[EEPROM&SD IMPORT] and press [EXECUTE] key and
[YES] key.
When the backup operation is completed, "COMPLETE" is dis-
played. Check to confirm the display.
played. Check to confirm the display.
2)
Use the storage backup function to restore the address book
data backed up in the procedure 2-2).
data backed up in the procedure 2-2).
3)
Use the device cloning function to restore the data backed up
in the procedure 2-2).
in the procedure 2-2).
5. Operation check
1)
Check the machine operations.
Check to confirm that the copy operation is executed normally.
Check to confirm that the copy operation is executed normally.
6. Installation
1)
Install the driver, and make necessary settings.
2)
Execute SIM22-10 to check to confirm that the “HDD” is not set
as “None” but displayed as “***GB”.
* The number shown in “***GB” changes depending on the
HDD you use.
as “None” but displayed as “***GB”.
* The number shown in “***GB” changes depending on the
HDD you use.
3)
Use SIM46-74 to execute the copy/printer color balance den-
sity adjustment.
sity adjustment.
Be sure to execute this adjustment.
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
(;3257,03257),/,1*'$7$
+''(;3257
+'',03257
((3520˂6'(;3257
((3520˂6',03257
Click on the first or last page to see other MX-2614N / MX-3114N (serv.man8) service manuals if exist.