Read Sharp MX-2614N / MX-3114N (serv.man8) Service Manual online
MX-3114N MX-EB13 (USB WIRELESS LAN ADAPTER) 22 – 1
MX-3114N
Service Manual
[22] MX-EB13 (USB WIRELESS LAN ADAPTER)
1. Unpacking
A. Packed items check
2. Installation
Before installation, turn the operation panel and main power
switches on the main machine OFF and unplug the power cord.
1) Connect the USB wireless LAN adopter to the USB terminal on
the main machine. Always connect it to the USB terminal on
the side or the rear side of the main unit. Never connect it to
the terminal at the front of the operation panel.
2) Reboot the machine.
After connected from the wired LAN to wireless LAN and vice
versa, always reboot the main machine.
3. System Setting Change
A. Simulation setting change
1) Enter SIM26-50.
2) Change the “WIRELESS SET” setting value from “0(NO)” to
2) Change the “WIRELESS SET” setting value from “0(NO)” to
“1(YES)”.
B. Confirmation of function enable
1) Connection Type change
a) Go into the following setting menue mode.
Home -> Settings -> Administrator Login -> Network Set-
tings -> Wireless Settings
b) Set “Connection Type” to “Wireless”.
c) Press [OK] Key.
c) Press [OK] Key.
The following message appeares with [OK] key pressed.
2) Access point registration.
Go into the following setting menue mode.
Home -> Settings -> Administrator Login -> Network Settings -
> Wireless Settings
a) Press [Configure] key.
a) Press [Configure] key.
No.
Name
Quantity
1
USB wireless LAN adapter
1
2
Operation manual
1
3
Safety guide
1
Name of setting
Setting
Available i/F
Connection Type
Switching
Wired Only (Default) Wireless LAN : Disable
Wired LAN : Enable
Wireless (Infrastruc-
ture Mode)
Wireless LAN : Enable (Op-
erable as a cordless hand-
set)
Wired LAN : Disable
Wired + Wireless (Ad-
hoc Mode)
Wireless LAN : Enable (Op-
erable as a cordless hand-
set)
Wired LAN : Enable
Click on the first or last page to see other MX-2614N / MX-3114N (serv.man8) service manuals if exist.