Read Sharp MX-2614N / MX-3114N (serv.man8) Service Manual online
MX-3114N MX-TR13 N (EXIT TRAY UNIT) 16 – 2
6)
Fix the E ring and the Bearing to the Shaft.
7)
Fix the Solenoid unit with the screws (M3x6 S-Tight).
* Check whether the Arm of the Solenoid unit is fxed to the
hole of the ADU frame F and the ADU base plate.
hole of the ADU frame F and the ADU base plate.
8)
Connec the connector of the Right arm unit to the connector of
the Solenoid unit.
the Solenoid unit.
9)
Attach the right paper exit cover, and fix it with the screw.
Connect the connector.
Connect the connector.
B. Paper exit tray attachment
1)
Attach the paper exit tray and the full-detection actuator
included in the package.
included in the package.
Be careful of the installing direction of the full detection actua-
tor.
tor.
C. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
D. Tray setting
Use SIM26-1 to set the tray YES/NO.
1
2
2
1
3DVVWKHOHDGOLQH
LQWRWKH0FODPS
LQWRWKH0FODPS
2
2
2
2
2
1
1
2
Click on the first or last page to see other MX-2614N / MX-3114N (serv.man8) service manuals if exist.