Read Sharp MX-2614N / MX-3114N (serv.man132) Technical Bulletin online
Work procedure:
*Before tightening the screw, please turn the shaft, and check that the lower coupling can rotate.
1. (1) Tighten M3 screw (x3).
2. Make wiring for each clutch, and then connect to the connector.
1. (1) Tighten M3 screw (x3).
2. Make wiring for each clutch, and then connect to the connector.
M3 screws
Tightening positions
Tightening positions
Pathway for positive rotation
of the clutch
of the clutch
Connect
Do not hook on to the rib.
Harness of the clutch
must not be caught.
must not be caught.
There should not be any
looseness within this area.
Hook on to the rib.
Harness of the clutch
must not be caught.
must not be caught.
Connect
4/6
Click on the first or last page to see other MX-2614N / MX-3114N (serv.man132) service manuals if exist.