Read Sharp MX-2614N / MX-3114N (serv.man132) Technical Bulletin online
Work procedure：
1. Remove DV drive belt BK and Pulley 22P(x2).
*Be careful not to drop the parallel pins.
*Check the number of Poly slider (2pcs).
2. Replace Pulley 22P (x2) with non-defective ones, and then mount them with DV drive belt BK.
*Make sure that the parallel pins are inserted into the axises.
*Be careful not to drop the parallel pins.
*Check the number of Poly slider (2pcs).
2. Replace Pulley 22P (x2) with non-defective ones, and then mount them with DV drive belt BK.
*Make sure that the parallel pins are inserted into the axises.
Be careful
not to drop the parallel pins.
not to drop the parallel pins.
NOTE:
There are two Poly sliders.
There are two Poly sliders.
Remove DV drive belt BK and Pulley 22P(x2)
and then replace Pulley 22P (x2)
with non-defective ones.
and then replace Pulley 22P (x2)
with non-defective ones.
2/6
Click on the first or last page to see other MX-2614N / MX-3114N (serv.man132) service manuals if exist.